Klipsch Speaker RC 10 User Manual

Dual 4'' Two-Way Center Channel  
RC-10  
I
I
I
Part of the new Reference 10 family, the RC-  
10 center channel adds a new value point to  
Klipsch’s best-selling Reference Series line by  
offering the same advanced technology and  
world-class materials as the Reference III  
center channels but from a smaller enclosure  
and at a lower price point.  
Magnetically shielded to prevent video interference  
Front porting and adjustable tilt for maximum placement flexibility  
Tractrix Horn titanium dome compression driver tweeter for clean,  
detailed highs  
I
I
Dual Cerametallic cone woofers in a Tapered Array configuration to  
maximize clarity  
High sensitivity and power-handling  
The RC-10 employs dual 4-inch woofers and a  
1-inch titanium-dome compression driver  
loaded with a 4-inch square Tractrix Horn for  
®
S P E C I F I C A T I O N S  
maximum clarity and efficiency.  
BANDWIDTH  
88Hz-20kHz 3dB  
This center channel also utilizes Klipsch’s  
Tapered-Array™ Technology, a 2.5-way design  
that minimizes the acoustical interference  
between drivers that plagues most horizontal  
center-channel speakers. This technology  
allows both woofers to create intense bass,  
while only one works with the tweeter to  
produce the midrange. The result is a smooth,  
clear sound not just directly in front of the  
speaker, but off to the sides as well, where  
conventional center speakers often exaggerate  
or mask sounds.  
SENSITIVITY  
95dB @ 2.83 volts/1 meter  
8 ohms compatible  
2550Hz  
NOMINAL IMPEDANCE  
CROSSOVER FREQUENCY  
POWER HANDLING  
75 watts (300 watts peak)  
ENCLOSURE TYPE  
DRIVE COMPONENTS  
Bass reflex via dual front-firing ports  
Tapered Array system using one 1''  
(2.5cm) magnetically shielded, titanium  
dome compression driver with an integral 4''  
(10.2cm) square 90˚x 60˚ Tractrix Horn and  
two 4'' (10.2cm) magnetically shielded,  
Cerametallic cone woofers  
The woofers on the RC-10 still feature  
Klipsch’s distinctive, copper-colored  
Cerametallic™ material. Made with an  
anodized aluminum, these cones are strong  
with low mass. The anodizing process  
converts their inner and outer surfaces to  
ceramic. The outcome is a rigid cone with  
superb damping characteristics that will not  
flex or resonate at frequencies within the  
woofer’s operating range.  
WEIGHT  
HEIGHT  
WIDTH  
DEPTH  
13 lbs. (5.9kg)  
5.4" (13.7cm)  
16" (40.6cm)  
9.1" (23.1cm)  
FINISH  
Black Ash woodgrain vinyl  
*All dimensions include grille and binding posts  
As in all Reference Series speakers, the RC-  
10 crossover network is constructed using  
extremely high-quality components including  
top-of-the-line internal wiring, polyester film-  
type capacitors and an air-core inductor to  
ensure signal purity and proper driver  
integration.  
Available in a black ash vinyl finish, the RC-10  
features a low-diffraction sculpted baffle and a  
magnetically attached grille for an elegant fit  
and finish.  
1-800-KLIPSCH  
All specifications are subject to change without notice. ©2004  
 

Init TV Video Accessories NT WG011 User Manual
Invacare Bathroom Aids 1300RTS User Manual
Invacare Mobility Aid Atlas User Manual
Jackson Dishwasher 07610 003 61 07 User Manual
JBL Speaker System SCS136 User Manual
Jet Tools Planer JJP 12 User Manual
Kawai Musical Instrument CP205 CP185 User Manual
Keys Fitness Network Card RTM 8000 User Manual
KitchenAid Range 2 CM User Manual
KMC Clock RCA 2600 3 User Manual