®
Compactor
Use & Care Guide
Compactador
Manual de uso y cuidado
Compacteur
Guide d’utilisation et d’entretien
Models/Modelos/Modèles 665.1363*
* = color number, número de color, numéro de couleur
Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Sears Canada Inc., Toronto, Ontario, Canada M5B 2B8
9872188
In Canada
WARRANTY
ONE-YEAR FULL WARRANTY ON COMPACTOR
For one year from the first day of use in your home, Sears will
repair, free of charge, defects in materials or workmanship.
Maintenance Agreements
Your purchase has added value because you can depend on
Sears HomeCentral® for service. With over 2,400 Service
Technicians and more than a million parts and accessories, we
have the tools, parts, knowledge and skills to back our pledge:
We Service What We Sell.
If the compactor is subjected to other than private family use, the
above warranty coverage is effective for only ninety days.
Your Kenmore® product is designed, manufactured and tested to
provide years of dependable operation. But like all products, it
may require service from time to time. The Sears Maintenance
Agreement offers you an outstanding service program, affordably
priced.
WARRANTY SERVICE
WARRANTY SERVICE IS AVAILABLE BY CONTACTING THE
NEAREST SEARS SERVICE CENTER IN THE UNITED STATES
OR CANADA. This warranty applies only while the product is in
use in the United States or Canada.
The Sears Maintenance Agreement
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state or province to
province.
I
I
I
Is your way to buy tomorrow’s service at today’s price
Eliminates repair bills resulting from normal wear and tear
Warranty terms may vary in Canada.
Provides phone support from a Sears technician on products
requiring in-home repair
For Sears warranty information in the United States or Canada,
please reference the service numbers located on the back page
of this manual.
I
Even if you don’t need repairs, provides an annual Preventive
Maintenance Check, at your request, to ensure that your
product is in proper running condition.
Sears, Roebuck and Co.
D/817WA, Hoffman Estates, IL 60179
Some limitations apply. For more information about Sears
Canada Maintenance Agreements, call 1-800-361-6665.
Sears Canada Inc.
Toronto, Ontario, Canada M5B 2B8
PRODUCT RECORD
Accessories
In the space below, record your complete model number, serial
number, and purchase date. You can find this information on the
model and serial number label, located as shown in the Parts and
Features section of this book. Have this information available to
help you quickly obtain assistance or service when you contact
Sears concerning your appliance.
To ensure proper functioning of your compactor, use Sears
replacement parts only. To order replacement parts or
accessories, call 1-800-4-MY-HOME® and ask for the
appropriate part number or contact your authorized Kenmore
dealer.
Model number 665.______________________________________________
Serial number___________________________________________________
Purchase date __________________________________________________
Save these instructions and your sales receipt for future
reference.
3
COMPACTOR SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or
“WARNING.” These words mean:
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:When using an electrical appliance, basic precautions should always be followed, including the
following:
I
I
I
Do not compact toxic or volatile flammable material
such as oily rags and insect sprays. Do not compact
lighted cigarettes, cigars, or other hot or burning
items. Do not overload the compactor.
Read all instructions before using the compactor.
Close supervision is necessary when used by or
near children. Do not allow to be used as a toy, or
to run unattended at any time. Lock Key Switch
when not in use and store key out of reach of
children.
I
I
Do not take apart the compactor. Incorrect
reassembly can cause electric shock when
subsequently used.
I
I
Do not touch moving parts.
Handle a loaded trash bag with care. Sharp objects
can pierce the bag and cause injury. Do not
overload trash bag with heavy material such as
glass.
Do not operate with a damaged cord set, plug,
motor, or after damage in any manner. Have the
compactor examined, repaired or adjusted by an
authorized serviceperson.
I This compactor is intended for household use only.
I
Use only for intended use as described in this
manual. Do not use other than manufacturer's
recommended attachments.
SAVE THESE INSTRUCTIONS
4
INSTALLATION INSTRUCTIONS
Installer: Leave Use and Care Guide with the homeowner.
4. Place the other 2 corner posts on the floor to the side of the
compactor. Grasp the sides of the compactor cabinet and put
compactor on its side on top of the corner posts. Remove the
shipping base from the bottom of the compactor.
Homeowner: Keep Use and Care Guide for future reference and
for local electrical inspector’s use, if required.
Unpacking
WARNING
A
B
Excessive Weight Hazard
Use two or more people to move and install
compactor.
Failure to do so can result in back or other injury.
A. Leveling legs
B. Shipping base
IMPORTANT: Begin in the room where the compactor will be
located.
1. Remove compactor from shipping carton. Remove all
protective packaging materials such as tape and shipping
pads. Use a mild detergent and warm water to remove waxy
residue caused by protective shipping material. Dry
thoroughly with a soft cloth. For more information, see
“Cleaning.”
Location Requirements
Product dimensions
2. Check to be sure the power cord is attached to the cord clip
on the rear of the compactor.
A
34¹⁄₈"
(86.7 cm)
A. Cord clip
24"
(61 cm)
15"
(38.1 cm)
3. Place the 2 corner posts from the carton on the floor near the
compactor. Press the foot pedal to open the compactor
drawer and remove any shipping materials or other items
from the drawer. Do not remove the compactor bag. Grasp
sides of drawer and lift drawer out of compactor. Place the
drawer on the 2 corner posts.
5
Cutout dimensions
Electrical Requirements
WARNING
3" min.
(7.6 cm)
A
34¹⁄₄" min.
(87 cm)
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
24" min.
(61 cm)
18" min.
(45.7 cm)
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
15¹⁄₄" min.
(38.7 cm)
A. Grounded electrical outlet must be a minimum of 3" (7.6 cm) away
from surrounding cabinets or nearby walls as shown. It can be
placed either to the left or the right side of the product.
Recommended Grounding Method
This compactor is for use on a single phase, 115-volt, 60 Hz, AC
only 15- or 20-amp fused and properly grounded circuit and is
equipped with a grounding plug as shown below. It is
recommended that a separate circuit serving only this appliance
be provided.
Clearance dimensions
This compactor must be grounded while in use to reduce the risk
of electric shock. The compactor is equipped with a three-
conductor cord and 3 prong grounding-type plug to fit the proper
grounding-type receptacle. The green (or green and yellow)
conductor in the cord is the grounding wire. Do not connect the
green (or green and yellow) wire to a live terminal.
Undercounter Installation
NOTE: Proper installation is your responsibility. Make sure you
have everything necessary for correct installation. It is the
personal responsibility and obligation of the customer to contact
a qualified installer to assure that electrical installation meets all
national and local codes and ordinances.
A
B
A. Leave 6" (15.2 cm) of clearance space to the right side of the
compactor in order to remove the compactor bags.
Tools needed
B. Leave 23" (58.4 cm) of clearance in front of the compactor in order
to fully open or remove the compactor drawer.
Gather the required tools and parts before starting installation.
I
I
I
I
I
Level
I
⁵⁄₁₆" hex-head socket
wrench
Phillips No. 2 screwdriver
Tape measure
Flat-blade screwdriver
Pliers
I
I
Scissors
Utility knife
IMPORTANT:
I
Slide compactor onto cardboard or hardboard before moving
compactor across floor to avoid floor covering damage.
I
Do not allow the rear frame of the compactor to touch the
floor covering when lifting or moving compactor.
6
5. Plug into a grounded 3 prong outlet.
Installing
6. Determine whether you want the compactor cabinet or
drawer front flush with the kitchen cabinet face.
1. Measure the height of your kitchen cabinet opening. The top
of the compactor should be a minimum of ¹ꢀ₈" (3 mm) from
the top of the kitchen cabinet opening.
Using 2 - #8 - 18 x ⁵ꢀ₁₆" mounting screws (provided), attach
the retaining brackets to the compactor cabinet top as
needed.
The rear wheels are preset for a kitchen cabinet opening
height of 34¹⁄₄" (87 cm) (position 1).
I
I
I
If the compactor cabinet face is to be flush with the
kitchen cabinet face, place retaining bracket mounting
screws through “1.”
To adjust for other kitchen cabinet opening heights:
I
Loosen self-tapping screw just enough to clear stud from
hole in position 1.
If the compactor drawer front is to be flush with the
kitchen cabinet face, place retaining bracket mounting
screws through “3.”
I
Move the rear wheel and stud to position 2 or 3 as
needed for your kitchen cabinet opening measurement:
If the compactor is to be midway between “1” and “3,”
place the retaining bracket mounting screws through “2.”
Position 2: 34¹⁄₄" to 34⁷⁄₁₆" (87 to 87.5 cm)
Position 3: 34⁷⁄₁₆" to 34⁵⁄₈" (87.5 to 88 cm)
NOTE: To level the unit in position 3, you may need to
add shims under the front leveling legs.
A
B
I
Tighten screw. Repeat for other rear wheel.
3
2
1
B
1
2
3
C
A. Countertop
B. Retaining bracket
A
7. Slowly lift the front slightly and roll compactor into the kitchen
cabinet opening.
8. Using 2 - #8 - 18 x ¹ꢀ₂" mounting screws (provided), fasten the
retaining brackets to the countertop with the mounting
screws.
D
A. Wheel bracket assembly
B. Compactor cabinet
C. Locating stud
Countertop mounting
D. Self-tapping screw (pivot)
2. Use pliers to lower front leveling legs away from compactor
cabinet. Adjust legs so there will be a ¹⁄₈" (3 mm) to ¹ꢀ₄"
(6.4 mm) space between the top of the compactor and the
top of the kitchen cabinet opening. Stand the compactor
upright.
A
3. Move the compactor close to its final position.
4. To install handle:
B
C
I
Insert screws into the holes from the inside of the drawer.
I
Place handle on the front of the drawer and align handle
screw holes with screw ends. (The handle should appear
as a “smile” when installed.)
A. Countertop
B. Retaining bracket
C. Mounting screw (provided)
I
Tighten screws snugly.
NOTE: If retaining brackets cannot be attached to the
underside of countertop, attach mounting clips (provided) to
retaining brackets. Fasten compactor to kitchen cabinet face
with mounting screws through the mounting clips.
A
B
C
A. 2 screws inserted into holes from inside of drawer
B. Top of drawer
C. Handle installed on drawer front
7
Cabinet-face mounting
9. Grasp sides of compactor drawer and place bottom of
drawer into tracks. Lift at the handle so drawer will go over
drawer stops. Close drawer. Check to see whether drawer
opens freely. If the toe plate rubs against floor, see “Adjusting
the Toe Plate” for further instructions.
C
D
A
Adjusting the Toe Plate
B
If the toe plate rubs the floor covering, the toe plate clearance
may be changed as follows:
1. Mark on each side of the toe plate the amount of toe plate
that rubs the floor covering.
2. Remove the drawer from the unit. See Step 3 in the
“Unpacking” section.
A. Mounting clip (provided)
B. Kitchen cabinet
C. Retaining bracket
D. Mounting screw (provided)
3. Use a ruler and a pencil or chalk to draw a line between the
marks on each side of toe plate.
4. Use scissors or utility knife to cut toe plate along line.
5. Replace drawer. If toe plate still rubs floor covering, repeat
steps 1-4.
COMPACTOR USE
How Your Compactor Works
Loading
The compacting ram is the part of the compactor which
compresses the trash. The compacting ram does not go to the
bottom of the drawer. You will not see compacting of trash the
first few times you load the compactor.
IMPORTANT: Do not push items down into compactor with
hands or feet.
1. Lift and pull the handle or press the foot pedal to open the
compactor drawer.
NOTE: The compactor drawer should be more than ¹⁄₂ full before
NOTE: Pressing the foot pedal opens the container only 3" to
6" (7.6 cm to 15.2 cm), depending on the load. Use the
handle to completely pull out the compactor drawer.
the compactor can begin to compress the load.
You may hear a noise when glass breaks. Strong glass bottles
may not break at all. The trash in a full compactor bag will be
about ¹⁄₄ the size of its original bulk.
2. Place trash in compactor.
I
Wrap or cover wet or messy trash.
I
Do not compact items that may develop offensive odors
such as raw meat, fish, grapefruit rinds, disposable
diapers, or personal hygiene items.
Load bulky trash, bottles, and cans in the center of the drawer.
Bottles or cans not placed in the center may become caught
between the ram and the drawer. The Drawer Monitor Switch
then senses a “misload” and causes the ram to return to the “up”
position without compacting.
I
Load bottles or cans on their sides in the center of the
drawer. Do not load bottles in an upright position.
3. Close the drawer.
8
3. Set Cycle switch to Extra Pac.
Starting Your Compactor
1. Lift and pull the handle or press the foot pedal to open the
compactor drawer. Load trash.
2. Keep Key-Knob (located on the control panel) in the “ON”
position.
A
4. Close compactor.
5. Lift foot pedal up to start the compacting cycle.
6. During the compacting cycle, the compactor remains locked
until you lift up on the foot pedal.
NOTE: When the compacting cycle is done, open the drawer
and turn the Key-Knob to “OFF.” Remove the Key-Knob and
store it out of children’s reach.
A. Control panel
3. Set Cycle switch to Normal Pac.
Air Freshener
The solid air freshener system is designed to help control odors
that might develop in the trash. An air freshener disc can be
purchased in department stores (not sold with compactor). Place
the disk-shaped solid air freshener into the air freshener
compartment. The air freshener should last 4 to 6 weeks. It is
used more rapidly when the temperature is high or the air is very
dry.
4. Close compactor.
5. Lift foot pedal up to start the compacting cycle.
NOTE: When the compacting cycle is completed, open the
drawer and turn the Key-Knob to “OFF.” Remove the Key-Knob
and store it out of children’s reach.
EXTRA PAC™ Cycle
The EXTRA PAC™ cycle extends the use of a bag by putting
constant pressure on the trash to keep it from springing back.
Regular use of the EXTRA PAC™ cycle can increase bag capacity
up to 25%.
Removing a Filled Bag
The compactor bag should be removed when trash is compacted
almost to the top of the drawer. If bag is too heavy when full,
remove bag when weight is easier to lift and carry.
During the EXTRA PAC™ cycle, the ram will stay in the down
position for extra compacting. The drawer is locked and cannot
be opened when the ram is down. For best results, use the
EXTRA PAC™ cycle for at least 30 minutes at a time.
IMPORTANT: Do not push items down into compactor with
hands or feet.
NOTE: Use paper or plastic bags made for use in a compactor.
These bags are designed to resist cuts, tears and leaks.
Compactor bags sized to fit compactor drawer make managing
compacted trash easier. Compactor bags are available from your
Sears store or service center.
To use EXTRA PAC™ cycle
1. Lift and pull the handle or press the foot pedal to open the
compactor drawer. Load trash.
To remove a filled bag
2. Keep Key-Knob (located on the control panel) in the “ON”
position.
1. Lift and pull the handle or press the foot pedal to open the
compactor drawer completely.
A
A. Control panel
9
2. You may already have a paper or plastic bag in place. Please
refer to appropriate instructions for your bag.
Installing a New Bag
I
If you have a paper bag, lift and fold up the top folded
edges of the bag. Fold ends in and bring side flaps
together. Fold flaps to close bag.
Do not use any kind of bag other than those designed especially
for use in your compactor. Order replacement compactor bags
through your local dealer. See “Accessories.”
IMPORTANT:
Before installing a new bag, be sure:
I
The drawer side is securely locked.
I
The container is clean and free of debris.
To install a new bag
1. Close drawer side. Lock drawer side latch.
Lift and fold up top bag edges.
Fold ends to close bag.
I
If you have a plastic bag, remove top of bag from bag
retainer buttons. Close bag with a twist tie.
2. Put bag caddy into drawer.
A
Remove bag from retainer buttons.
Close bag with twist tie.
3. Release drawer side latch. Tilt right drawer side down. This
will make removing the full bag easier.
A. Bag caddy inside drawer
3. Place either a plastic or paper bag into the drawer.
I
If using a paper bag, open bag and pull top edges over
the drawer top. Slide front edge of bag over front edge of
drawer. Slide rear edge over rear of drawer.
I
If using plastic bag, open bag and pull top edges over
drawer top. Lock bag into place by pulling the
4 prepunched holes over the bag retainer buttons. Holes
will expand over buttons without harming bag.
4. Lift bag by bag caddy handles. Remove trash bag from
compactor and dispose properly.
NOTE: Fully compacted trash bags will be heavy. Handle with
care.
A
Installing paper bag
Installing plastic bag
A. Lifting bag caddy by handles
4. Press inside of bag against the drawer bottom, sides and
corners for a smooth fit.
10
COMPACTOR CARE
Your new compactor is designed to give you many years of dependable service. However, there are a few things you are expected to do
in order to properly maintain your compactor. This section will tell you how to clean and care for your compactor.
Cleaning
Before cleaning the compactor, turn the Key-Knob (or Key-
Switch) to the OFF & LOCK position and remove it.
Cleaning Inside the Cabinet
NOTE: Any services other than those outlined in this section
should be performed by a designated service representative.
NOTE: You may want to wear protective gloves since there may
be bits of glass in the cabinet.
1. Pull the drawer out until it stops.
Cleaning Exterior Surfaces
NOTE: Look to see how the drawer rollers move in the tracks.
It will be easier to replace the drawer after you have finished
cleaning.
1. Wash exterior surfaces (including stainless steel) with a clean
sponge or soft cloth and a mild detergent in warm water. Do
not use abrasive or harsh cleaners. Rinse and dry thoroughly
with a soft cloth.
2. Wipe up spills right away. Some foods can damage the finish
if left on the compactor surface.
Cleaning Inside the Drawer
NOTE: You may want to wear protective gloves since there may
be bits of glass in the drawer.
2. Lift the front of the drawer to clear the stops.
1. Remove the bag. See the “Removing a Filled Bag.”
2. Press down on the lever-action lock (or Side-Lock latch).
3. Grasp the drawer on the sides and pull it out the rest of the
way. Set the drawer down gently.
3. Hold the lever-action lock down and tilt the side of the drawer
out until the lock clears the drawer front.
4. Vacuum the inside of the cabinet. Liquid spills or wet trash
should be cleaned up by hand, or by using a vacuum
designed to pick up liquids.
NOTE: If desired, the drawer side can be removed by tilting it
up, then lifting it out.
5. Wash the inside of the cabinet with a clean sponge or soft
cloth and a mild detergent in warm water. Rinse and dry
thoroughly with a soft cloth.
4. Wash the interior of the drawer with a clean sponge or soft
cloth and a mild detergent in warm water. Rinse and dry
thoroughly with a soft cloth.
6. To replace the drawer, grasp it by the sides and insert the
5. If the drawer side was removed, slide it back into the tilted
rollers onto the tracks.
position.
7. Lift the front of the drawer and push it in fully past the stops.
6. Press the lever-action lock (or Side-Lock Latch) down while
pushing the drawer side to the upright position.
Cleaning the Ram
7. Latch the drawer side by pushing up the lever-action lock (or
Side-Lock Latch).
NOTE: You may want to wear protective gloves since there may
be bits of glass on the ram cover.
1. Wipe glass particles off of the ram cover with a cloth or paper
towels.
11
2. Remove foods with a clean sponge or soft cloth and a mild
detergent in warm water. Rinse and dry thoroughly with a soft
cloth.
Cleaning Before a Vacation
If you will be away for more than a couple of days, remove the
compactor bag. Remove the Key-Knob (or Key-Switch) and store
it out of children’s reach.
TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
Trash is not compacting
The drawer will not open
I
Is the drawer less than half full? Drawer must be more than
I
I
Did you lift up on the handle to pull drawer out or press
foot pedal? Drawer is designed to slightly open until you lift
up on the handle to pull drawer out or press on the foot
pedal.
half full before trash is compacted.
Your compactor will not operate
Is the ram all the way up? Drawer will open only when ram is
fully raised.
I
I
Is the power supply cord unplugged? Plug into a grounded
3 prong outlet.
To raise the ram, lift up on the foot pedal. See “Starting
Your Compactor.”
Has a household fuse blown, or has a circuit breaker
tripped? Replace the fuse or reset the circuit breaker. If the
problem continues, call an electrician.
I
Is the EXTRA PAC™ cycle selected? Drawer remains
locked until you reset it by lifting up on the foot pedal. See
“Starting Your Compactor.”
I
I
Is the drawer completely closed? Close the drawer firmly
and start the compactor again.
There is not enough compaction or force
Is the Key-Knob turned all the way to ON? Turn the Key-
Knob (Key-Switch) fully to ON. See “Starting Your
Compactor.”
I
I
Do you use the compacting cycle frequently enough?
Compacting works best when only a few items are loaded.
Bottles do not break
How often do you notice this? Bottles will not break every
time. The thickness of the bottle’s glass and the content of
the trash load below it may keep the bottle from breaking.
12
|