Jwin Car Video System JV TV5020 User Manual

JV-TV5020  
USERS MANUAL  
CUSTOMER SERVICE INFORMATION  
JWIN New York Office 51-41 59th Pl.,  
Woodside, NY 11377 USA  
1-866-807-JWIN  
Toll Free Number:  
E-mail:  
8-CHANNEL QUAD SPLITTER  
 
JV-TV5020 USER’S MANUAL  
USER’S MANUAL  
JV-TV5020  
V C R MODE : The Screen comes to VCR mode.  
AUTO MODE : Displays each channel sequentially.  
INDEX  
.
20  
19  
PAGE  
SECTION 1  
FREEZE  
A
B
1
5
2
6
3
7
4
1.  
2.  
PURPOSE OF THIS PRODUCT  
SPECIFICATIONS  
SECTION 2  
1
2
8
Z
3.  
4.  
CONNECTIONS  
3
5
5
6
INSTALLATION  
UP  
4-1. Basic System Installation  
4-2. Installation with a VCR or Time Lapse Recorder  
SECTION 3  
LEFT  
ENTER RIGHT  
DOWN  
MENU  
MODE  
5.  
OPERATION  
8
REMOTE CONTROL UNIT  
5-1. Change Display Mode  
5-2. QUAD Mode Operation  
5-3. Automatic Camera Skip in the Auto Mode  
5-4. Manual Mode Operation  
8
10  
11  
11  
5-5. How to Program the Menus for On-Screen-Display 11  
5-6. Recording and Playback  
IR REMOTE CONTROL  
6-1 Function Selection Keys  
6-2 Other Keys  
18  
6.  
7.  
18  
19  
20  
Fig. 10 Remote Control  
6-1. Function select keys.  
TROUBLESHOOTING  
20  
Z
ZOOM MODE : 2X Zoom Mode  
QUAD MODE : It makes you to select the Quad Mode .  
8-CHANNEL QUAD SPLITTER  
8-CHANNEL QUAD SPLITTER  
 
JV-TV5020 USER’S MANUAL  
USER’S MANUAL  
JV-TV5020  
5-6. Recording and Playback  
1
SECTION 1  
There are two video output ports on the rear of the splitter. One  
of them is MON port which is for output of the Quadrant pictures  
and sequential pictures.  
1. PURPOSE OF THIS PRODUCT  
The purpose of this COLOR QUAD SPLITTER is to provide an  
economical, but effective method to monitor more than one area with video  
cameras. This Splitter has following features to enable the users to get the  
best for their money and efforts:  
Read the specifications for Time Lapse Recorder or VCR  
thoroughly before doing this step, because its manufacturer uses  
different methods to record.  
a. To record, connect a coaxial cable to the AUDIO IN and VIDEO  
IN/OUT port on the rear of the monitor and connect the other  
end of the coaxial cable to the VIDEO IN/OUT port on the VCR.  
b. Press the RECbutton on the VCR.  
z Accepts NTSC.  
z NTSC : 720x480 Pixels.  
z Real time quad picture display.  
z PIP (Picture-In-Picture) function.  
z 2x ZOOM with Vertical and Horizontal interpolation.  
z Full-screen display of one camera.  
z Four-position sequential switcher.  
z Programmable dwell times to include cameras and the quad  
display in the sequential switching mode.  
z On-screen-display and programmable menus.  
z User-programmed data is protected battery back up.  
z Freeze capability can freeze a picture.  
Program selectable border line.  
c. To play, press the AUTO button of the monitor until it goes to  
the VCR mode with black screen and beeping sound.  
d. Press the PLAYbutton on the VCR.  
e. The recorded picture will be displayed on the monitor.  
When you are operating the normal VCR, make sure that the  
VCR is in line or A/V mode.  
6. IR REMOTE CONTROL  
This color quad splitter is also operated by IR Remote Controller.  
8-CHANNEL QUAD SPLITTER  
8-CHANNEL QUAD SPLITTER  
 
JV-TV5020 USER’S MANUAL  
USER’S MANUAL  
JV-TV5020  
a. key buzzer  
2. SPECIFICATIONS  
17  
18  
[Y] When use this button, BUZZER voice sounds.  
[N] When use this button, BUZZER is dumb.  
z
z
z
z
z
z
z
System  
b. loss buzzer  
NTSC: 525 lines, 60 fields per second  
Input Signal  
[Y] Camera connection signal becomes BUZZER sound if is  
patience.  
Composite video, sync. Negative  
Operating Temperature  
32 to 104 degree F  
Humidity  
[N] If camera connection sign is patience, BUZZER is dumb.  
5-5-4. PAGE 5 SPECIAL Menu  
Press the MODE/MENU button again, the following menu  
screen will be displayed.  
0% to 90% (non-condensing)  
Connectors  
[ SPECIAL ]  
BNC connector : video in/out  
Power Source  
DEFAULT LOAD  
EXIT  
: [Y]  
DC 12V , 1.5A  
Power consumption  
10.5W  
- PAGE4 -  
Fig. 9 Page 4 Menu  
a. This function is to Loading for INITIAL data.  
-
-
[N] : Disable INITIAL data loading.  
[Y] : Enable INITIAL date loading.  
8-CHANNEL QUAD SPLITTER  
8-CHANNEL QUAD SPLITTER  
 
JV-TV5020 USER’S MANUAL  
USER’S MANUAL  
JV-TV5020  
-
-
Place the green color character to the DWELL TIME  
using the ◀ ,▶ , ▲ and the ▼ buttons, and press  
SECTION 2  
3
2
the ENTER button to flash the Dwell Time and set it using  
the ▲ or the ▼ buttons. Press the ENTER button again  
to stop flashing the Time.  
3. CONNECTIONS  
The following connections are located on this splitter. See Fig. 1  
for connection locations. Do not plug the power supply into this  
splitter until all connections are made.  
Press the MODE/MENU button to return to the Page 2  
INDIVIDUAL menu.  
FRONT VIEW  
c.  
LOAD  
The video signal is normally terminated by 75 ohms. But in  
case the signal is distributed to a number of lines, only one of  
lines is needed to be terminated by 75 ohms (1Vp-p), while  
the other lines are terminated by High impedance status  
(2Vp-p). The 75 ohms or the HI can be selected by pressing  
the ENTER button.  
Fig. 1 (CONNECTION LOCATIONS Front View)  
Note.  
(1) This splitter has 2pages (is consists of page A with channel 1~4  
and page B with channel 5~8).  
5-5-3. Page 4 BUZZER Menu  
Press the MODE/MENU button again, the following menu  
screen will be displayed.  
(2) All buttons have a different function by press button short or long.  
(3) To go into the ZOOM or MENU or VCR mode, press the  
corresponding button long.  
[ BUZZER ]  
KEY BUZZER  
LOSS BUZZER  
ALARM BUZZER  
ALARM TIME  
EXIT  
:
:
:
:
[Y]  
(4) By pressing channel button shortly, channel moves to anther  
channel where is located in the same place on different page.  
(5) By pressing Quad button shortly in Quad mode, the screen moves  
to anther Quad mode on different page.  
[Y]  
OFF  
OFF  
(6) If you press channel button long, the screen became freeze frame.  
- PAGE4 -  
8-CHANNEL QUAD SPLITTER  
8-CHANNEL QUAD SPLITTER  
 
JV-TV5020 USER’S MANUAL  
USER’S MANUAL  
JV-TV5020  
Fig. 8 Page 4 Menu  
When it is set to be zero (OFF) the corresponding camera will  
be skipped in the Automatic sequential switching mode.  
- Buttons on the Front View  
16  
POWER button is to turn the system ON or OFF.  
REMOTE is IR(Infra-red) sensor.  
[ INDIVIDUAL ]  
Title  
Dwell  
Alm  
Load  
③ Buttons CH1(ch5), CH2(ch6), CH3(ch7) and CH4(ch8)are to select  
a channel.  
CH1: C 1  
03s  
03s  
03s  
03s  
OFF  
OFF  
OFF  
OFF  
75  
75  
75  
75  
CH2: C 2  
CH3: C 3  
CH4: C 4  
QUAD If press button, conversion and page (Page A, Page B)  
conversion in Quad screen .  
QUAD A: PAGE 1 03s  
EXIT  
ZOOM button displays the 2x ZOOM picture in any mode.  
MODE button displays the PIP or 2PIP.  
MENU button is to go into the on-screen-display mode.  
VCR button displays the VCR video input.  
REAR VIEW  
- PAGE2 -  
Fig. 7 PAGE2,3 MENU  
a. Camera Title  
- Place the green color character to the date digit using the  
◀ , ▶ , ▲ and the ▼ buttons and press the ENTER  
button. The first empty box will be flashing  
-
Select the position you want to enter the letter or the  
numeric number using the ◀ , ▶ buttons.  
▲ and the ▼ buttons is to change the new character.  
Press the ENTER button to return to the Page 2  
INDIVIDUAL menu.  
-
-
You can enter up to 8 characters for each camera title.  
Fig. 2 (CONNECTION LOCATIONS Rear View)  
- Connections on the Back View  
b. Set the DWELL TIME  
Dwell Time is the amount of time that a camera is displayed  
on the screen when the system is in the Automatic sequential  
switching mode. The Dwell Time can be adjusted individually  
for each camera and the quad display from 1 to 30 seconds.  
CAMERA INPUT (channel 1 to 8) connectors are BNCs for  
composite video input/output.  
VCR IN/OUT is a BNC connector for video input/output.  
MAIN MONITOR is video out to the monitor.  
8-CHANNEL QUAD SPLITTER  
8-CHANNEL QUAD SPLITTER  
 
JV-TV5020 USER’S MANUAL  
USER’S MANUAL  
JV-TV5020  
DC IN is input for DC +12V.  
usage. See Important Safeguardsin this manual.  
-
Install cameras to be connected to this splitter.  
the DATE (MM:DD:YYYY). Change the content using the  
▲ and the ▼ buttons. Press the ENTER button again to  
stop flashing the DATE.  
4.  
INSTALLATION  
5
4
4-1.  
Basic System Installation  
Perform following steps to install your splitter. See Fig. 3.  
-
-
Use the ◀ and the ▶ buttons to shift the cursor to the  
next digit.  
Press ENTER button at the EXIT location to exit from this  
mode, the splitter will display the quadrant pictures.  
c.  
There are three formats to display the date.  
- MM-DD-YYYY: for U.S.A.  
- YYYY-MM-DD: for Asian countries.  
- DD-MM-YYYY: for European countries.  
Set the TIME & TITLE Display and BOUNDARY LINE  
VIDEO IN  
d.  
-
-
Place the cursor to the Y.  
MONITOR  
Selecting Y or N using the ENTER button will turn the  
TIME & TITLE Display and BOUNDARY LINE ON or OFF.  
Fig 3. INSTALLATION FOR CAMERAS  
e.  
Set the BLANK COLOR  
-
-
Unpack all components of the splitter from the packing  
-
-
Place the cursor to the BLUE.  
material.  
Selecting BLUE, GRAY or BLACK using the ENTER  
button will decide the color of the blank channel.  
Identify all of the following pieces:  
z Color Quad Splitter  
f.  
Set the EXIT  
z Adaptor (+12V, 1.5A)  
- Place the green color character to the EXIT with the ▲  
and the ▼ buttons.  
z Remote control  
z CCD Cameras and Camera Cables (Optional)  
z Users manual  
- Press the ENTER button to exit the MENU setup mode.  
5-5-2. Page 2 INDIVIDUAL Menu  
The following items can be adjusted or programmed on this  
-
Place the quad splitter in a convenient location for your  
8-CHANNEL QUAD SPLITTER  
8-CHANNEL QUAD SPLITTER  
 
JV-TV5020 USER’S MANUAL  
USER’S MANUAL  
JV-TV5020  
menu screen. Pressing MODE/MENU button again, the  
- Place the cursor to the date digit using the ◀ , ▶ ,▲  
and the ▼ buttons, and press the ENTER button to flash  
following menu screen will be displayed.  
5-5-1. Page 1 GENERAL Menu  
-
Connect the DC power cord between this splitter and your  
wall mounted power outlet.  
13  
The following items can be adjusted or programmed on this  
menu screen.  
-
-
Turn on the power of all cameras and this splitter.  
A quadrant display should be seen on the monitor.  
[ GENERAL ]  
4-2. Installation with a VCR or Time Lapse Recorder  
This splitter may be installed with a standard VCR or a Time  
Lapse Recorder. Perform following steps to install the splitter  
with them.  
TIME  
DATE  
: 00:00:00  
: 01/01/2002  
:MM/DD/YYYY  
: [Y]  
DATE FORMAT  
TIME DISPLAY  
TITLE DISPLAY  
BOUNDARY LINE  
BLANK COLOR  
ALARM TIME  
EXIT  
: [Y]  
: [Y]  
: [BLUE]  
: OFF  
: [Y]  
- PAGE1 -  
Fig 6. Page 1 Menu  
a.  
Set the TIME  
- Place the cursor to the time digit using the ◀ or the▶  
buttons, and press the ENTER button to flash the TIME  
(HH:MM:SS) and set it using the ▲ or the ▼ buttons.  
Press the ENTER button again to stop flashing the TIME.  
VIDEO OUT VIDEO IN  
-
Use the ◀ and the ▶ buttons to shift the cursor to the  
next digit.  
VCR (Rear view)  
- The TIME is displayed in military form of time.  
-
Press ENTER button the EXIT location to exit in this mode,  
the splitter will display the quadrant pictures.  
Fig. 4 INSTALLATION WITH A VCR  
b.  
Set the DATE  
-
Connect all cameras to the splitter.  
8-CHANNEL QUAD SPLITTER  
8-CHANNEL QUAD SPLITTER  
 
JV-TV5020 USER’S MANUAL  
USER’S MANUAL  
JV-TV5020  
-
Check if you are ready with following stuffs.  
z Recorder  
z Two RCA to BNC video coaxial cables for Time Lapse  
MODE key in MENU Mode  
6
7
Recorder  
[ INDIVIDUAL ]  
[ GENERAL ]  
: 00:00:00  
z Video Tape  
TIME  
DATE  
Title  
Dwell  
Alm  
Load  
: 01/01/2002  
DATA RORMAT  
TIME DISPLAY  
TITLE DISPLAY  
BOUNDARY LINE  
BLANK COLOR  
ALARM TIME  
EXIT  
: MM/DD/YYYY  
z Two RCA to RCA video coaxial cables for consumer  
recorder (if necessary)  
CH1: C 1  
03s  
03s  
03s  
03s  
OFF  
OFF  
OFF  
OFF  
75  
75  
75  
75  
:
:
[Y]  
[Y]  
CH2: C 2  
CH3: C 3  
CH4: C 4  
QUAD A: PAGE 1 03s  
EXIT  
:
[Y]  
:
:
[BLUE]  
OFF  
[Y]  
-
-
-
-
Connect one video coaxial cable from the VCR OUT on  
the back of the splitter to the VIDEO IN port of the VCR.  
Plug the DC power cords for the splitter and the recorder  
into the wall mounted power outlets.  
:
- PAGE2 -  
- PAGE1 -  
Menu[1]  
Menu[2]  
Turn on the power switches for the splitter and the  
recorder. A picture should be displayed on the monitor.  
Program the recorder and start the recording process  
using the VCR manufacturers instructions.  
[ INDIVIDUAL ]  
[ SPECIAL ]  
Title  
CH1: C 5  
CH2: C 6  
CH3: C 7  
CH4: C 8  
Dwell  
Alm  
Load  
DEFAULT LOAD  
EXIT  
: [Y]  
03s  
03s  
03s  
03s  
OFF  
OFF  
OFF  
OFF  
75  
75  
75  
75  
QUAD B: PAGE 2 03s  
EXIT  
- PAGE3 -  
CAUTION  
- PAGE5 -  
Do not use staples to support the cables or wires (it might be  
damaged).  
Menu[5]  
Menu[3]  
[ BUZZER ]  
All connections should be properly connected and insulated to  
prevent electrical shock and fire hazards.  
KEY BUZZER  
:
[Y]  
[Y]  
OFF  
OFF  
LOSS BUZZER  
ALARM BUZZER  
ALARM TIME  
EXIT  
:
:
:
- PAGE4 -  
Menu[4]  
8-CHANNEL QUAD SPLITTER  
8-CHANNEL QUAD SPLITTER  
 
JV-TV5020 USER’S MANUAL  
USER’S MANUAL  
JV-TV5020  
Fig 5. MENU PAGE[1], [2], [3], [4], [5]  
SECTION 3  
5-3. Automatic Camera Skip in the Auto Mode  
12  
If you do not wish to view a particular camera, set the  
DWELL TIME in the MENU(2),(3) setup mode to a value of  
zero.  
5. OPERATION  
5-1 Change Display Mode  
5-4. Manual Mode Operation  
There are 6 Different display mode styles as shown below. And they  
are selected by the MODE key or the QUAD key or the AUTO key or  
CHANNEL keys. When system is reset or power is turned on system  
is initialized to the QUAD mode.  
This splitter displays only one camera (full-screen), even if  
there are additional cameras connected to it.  
-
Press the QUAD button on the front panel of the splitter  
to enter the AUTO mode from the QUAD mode. If the  
splitter is currently in AUTO mode, proceed next step.  
Press the desired channel button.  
PAGE A  
01/01/2002 00:00:00  
01/01/2002 00:00:00  
C 1  
-
-
C 1  
C 3  
C 2  
C 4  
Press the QUAD button to return to the QUAD mode.  
5-5. How to Program the Menus for OSD (On-Screen Display)  
There are three pages of Menus to display the time, date, and  
a camera title for each camera, etc. on the monitor. To enter  
the MENU setup mode, press the MODE/MENU button on the  
front panel of the monitor until the MENU displays on it (2  
seconds). The page 1 GENERAL screen will be displayed with  
beeping sound, and pressing MODE/MENU button one more  
time will show the Page 2 INDIVIDUAL screen, then the Page  
3, Page 1, Page 2, so on. Press the ENTER button the EXIT  
location in Menu1 to exit the MENU setup mode.  
C 2  
QUAD Mode  
1 Picture In Picture Mode (1PIP)  
C 1  
01/01/2002 00:00:00  
C 1  
01/01/2002 00:00:00  
C 2  
C3  
C 2  
2 Picture In Picture Mode (2PIP) Sequence Picture In Picture Mode  
8-CHANNEL QUAD SPLITTER  
8-CHANNEL QUAD SPLITTER  
8
 
JV-TV5020 USER’S MANUAL  
USER’S MANUAL  
JV-TV5020  
C 1  
01/01/2002 00:00:00  
AUTO key  
C 1  
01/01/2002 00:00:00  
CHANNEL key  
Any Mode  
Single Mode  
Auto Sequence Mode  
Single Mode  
The following diagram shows the sequence of selected mode when  
pressing QUAD key and CHANNEL keys.  
QUAD key  
Auto  
Sequence Mode  
CHANNEL key  
Sequence  
PIP Mode  
Single Mode  
QUAD Mode  
Any Mode  
Sequence  
PIP Mode  
The following diagram shows the sequence of selected mode when  
pressing MODE key.  
Sequence  
PIP Mode  
MODE key  
QUAD key  
Sequence  
PIP Mode  
5-2.  
Quad Mode Operation  
1 PIP Mode  
The splitter normally displays quadrant picture in the Quad  
mode to the monitor when the power is first applied to it. If  
the monitor is not displaying quadrant pictures, press the  
QUAD button so that the unit returns to the QUAD mode.  
Press the (CH1,ch5), (CH2,ch6), (CH3,ch7) and (CH4,ch8)  
button to freeze the picture. Corresponding picture(s) will be  
frozen with the letter Fon the screen.  
Quad Mode  
Any Mode  
2 PIP Mode  
The following diagram shows the sequence of selected mode when  
pressing AUTO key and CHANNEL keys.  
8-CHANNEL QUAD SPLITTER  
9
8-CHANNEL QUAD SPLITTER  
10  
 

Indesit Freezer GSF4100 User Manual
Indesit Washer Dryer WIDXE 146 S User Manual
Insignia Battery Charger NS PWLC591 User Manual
Iron A Way Iron NE 242 User Manual
JVC Speaker System UX P7 User Manual
Kalorik Coffeemaker USK CM 17442 User Manual
Kambrook Iron KI400 User Manual
Kenwood Stereo Amplifier KAC PS500F User Manual
Kenwood Stereo Receiver VR 8070 User Manual
KitchenAid Refrigerator GT1SHWXPB02 User Manual