IMPRESSA X
F
70
Short operating instructions
First use
Insert filter (first use)
Press power switch (I) (on rear)
Fill bean tank
Remove water tank and empty it
(1)
Flip up cartridge (1) holder
Touch symbol
Insert filter cartridge (2) into water tank, applying slight
pressure
(2)
Close cartridge holder (1) (engages audibly)
Fill water tank and insert
Display text:
SPRACHE - DEUTSCH
Turn the Rotary Switch until the required language is displayed
Confirm selected language by pressing the Rotary Switch
Lift out water tank
Hold Rotary Switch down until the display shows
Confirm setting by pressing the Rotary Switch
FILTER
Fill water tank and place back into the machine
Display text:
OPEN TAP
Place a receptacle (ca. 1 litre) under the hot water nozzle
Turn Rotary Switch until the display shows
YES
Turn tap to position
Confirm setting by pressing the Rotary Switch
Turn it back to the initial position when display prompts you to
do so
Display text:
PRESS - MAINT.
Place receptacle under height-adjustable coffee spout
Touch symbol when display prompts you to do so
Place a receptacle (ca. 1 litre) under the hot water nozzle
Turn tap to position
Turn it back to the initial position when display prompts you to
do so
The machine is ready for use
The machine is ready for use
Cleaning (duration: approx. 15 minutes)
Changing the filter
Display text:
Display text:
READY - CLEAN
READY - FILTER
Touch the maintenance symbol
until the display shows
NOTE:
After having used 50 litres of water or after two months at the
latest, the filter cartridge will be used up.
EMPTY - TRAY
Empty drip and grounds tray and place back into the machine
Remove drip tray
Touch symbol
to switch machine off
until the display shows
Place a receptacle (ca. 1 litre) under the coffee spout
Touch the maintenance symbol
Touch maintenance symbol
CHG FILTER - OPEN TAP
Drop an original JURA cleaning tablet into the filler funnel for
ground coffee when display prompts you to do so
Close lid
Remove and empty water tank
(1)
Flip up cartridge holder (1)
Remove old CLARIS plus filter cartridge from the tank
Place new filter cartridge (2) into water tank, applying slight
pressure
(2)
Touch the maintenance symbol
Close cartridge holder (1) (engages audibly)
Empty drip and grounds tray and place back into machine when
display prompts you to do so
Fill water tank and place back into machine
Place a receptacle (ca. 1 litre) under the hot water nozzle
Turn tap to position
Wipe out filler funnel for ground coffee with a dry cloth after
the cleaning program has finished.
Turn it back to the initial position when display prompts you to
do so
The machine is ready for use
The machine is ready for use
Decalcifying (duration: approx. 40 minutes)
Decalcifying (continuation)
Empty drip and grounds tray and place back into machine when
Display text:
READY - DECALCIFY
display prompts you to do so
Touch symbol
to switch machine off
Rinse water tank well, fill with cold, fresh tap water and place it
back into the machine
Place receptacle under spout
Touch maintenance symbol
until the display shows
Turn tap to position
EMPTY - TRAY
Turn it back to the initial position when display prompts you to do
so
Empty drip and grounds tray and place back into machine
Remove 2-stage frothing jet or hot water nozzle
Empty drip and grounds tray and place back into machine when
display prompts you to do so
Remove water tank and empty it
Completely dissolve contents of a blister (3 tablets) in 0.6 litres
of water
Fit 2-stage frothing jet or hot water nozzle
Pour solution into the empty water tank
Place water tank back into machine
Shift receptacle under height-adjustable coffee spout
Place a receptacle (ca. 1 litre) under the spout
Touch maintenance symbol
do so
when display prompts you to
Turn tap to position
Turn it back to the initial position when display prompts you to
do so
The machine is ready for use
Cleaning the 2-stage frothing jet
Notes
TIP:
To ensure perfect operation of the 2-stage frothing jet, we
recommend you clean it regularly.
Hold the nozzle at the top and at the bottom end or use a 7 mm
open-ended spanner
Screw the nozzle apart
Thoroughly rinse the 3 parts under running water
NOTE:
The display will not prompt you to clean the 2-stage frothing jet
|