John Lewis JL3/95-CB
Flat-screen television stand
Instruction manual
Stage 2
2.
•
Attach 6 self-adhesive clear plastic
buffers to each shelf frame. Position
d
k
k
one buffer in each corner and one
centrally at the front and rear of the
frame as shown on the right.
Carefully place top glass shelf
(8mm
•
•
d
glass) onto the 6 clear plastic buffers on
the top shelf frame. The black printed side
of the glass should be on the underside.
Carefully insert the two remaining glass
e
shelves
(5mm glass) onto plastic
e
buffers on the remaining shelf frames.
Take extra care not to damage either the
legs or back panel during this stage.
k
•
Fully tighten all screws to secure
assembly.
x18
Stage 3
3.
•
Peel protective backing from
self-adhesive strips on cable tidy
clips
.
m
•
•
Firmly attach cable tidy mouldings to
rear of back panel.
m
The mouldings can be simply ‘un-clipped’
to allow cable access and then ‘clipped’
back into place to keep the cables
captive.
Flat-screen television stand
John Lewis JL3/95-CB
Certificate of conformity
Component
Description
Qty Packed by
Shelf frame
a
3
Front frame
Back panel
1
b
c
1
1
2
Glass top shelf
(8mm thick)
d
Black print on underside
Glass shelf
(5mm thick)
e
Black print on underside
Fixing screw
Sleeve nut
Allen key
18
6
f
g
2
h
j
Self-adhesive soft
plastic feet
2
Self-adhesive clear
plastic buffers
18
k
Cable tidy clips
m
2
John Lewis Partnership
171 Victoria Street
London SWIE 5NN
issue 01 08/07
|