UB12D
FLASHLIGHT
CAUTION
RISK OF INJURY!
READ MANUAL BEFORE OPERATING!
THIS MANUAL IS AN IMPORTANT PART OF THE FLASHLIGHT
AND SHOULD REMAIN WITH THIS UNIT WHEN YOU SELL OR RENT IT.
CAUTION
Do not look at the light directly.
Do not open the front cover immediately after using the flashlight because the bulb is
very hot.
Be sure to turn the switch OFF before replacing the bulb or when not using.
Do not expose the flashlight to rain.
Do not shock or disassemble the flashlight.
Do not allow the flashlight to contact gasoline, thinner etc.
Do not leave the flashlight in a car or the like that tends to be exposed to the scorching
heat of the sun (above 60°C). Otherwise, troubles can result.
Operation
OPERATION:
Handle
Insert
Remove
Push
Latch
Battery
Fig. 4
Fig. 2
1. BATTERY INSERT/REMOVAL
Fig. 3
Fig. 1
Correctly insert the battery into the flashlight (Fig. 1)
Pressing on the latch, remove the battery from the flashlight. (Fig. 1)
2. HEAD ANGLE ADJUSTMENT
Adjusting the lighting angle, hold the handle then adjust the head angle.
It can be adjusted at 0°, 30°, 60°, 90° and 110°. (Fig. 2)
3. BULB REPLACEMENT
a. Remove the front cover. (FIg. 3)
b. Replace the bulb. (Fig. 4) (A spare bulb is set in the head.)
Specifications
Battery
Bulb
EB9, EB12 series (sold separately)
12 V, 0.7 A
Operating time
Approx. 3 hours
(Using full charged EB1220BL battery)
85 mm (diameter) x 252 mm (length)
0.28 kg
Dimensions (without battery)
Weight (without battery)
Flashlight Operator's Manual
3
#37-0709-090403
Manufactured for Deere & Company,
©Copyright 2003. John Deere
Moline, Illinois 61265
Flashlight Operator's Manual
205 Code No. C99513961 N
|