20626
Universal Remote
Instruction Manual
Introduction
Congratulations.on.your.purchase.of.this.20626.Universal.Remote.
Control..It.is.one.of.the.most.unique.looking,.and.easy.to.use.
remote.controls.available.today..With.the.20626.juggling.multiple.
remote.controls.is.a.thing.of.the.past!.Your.20626.Universal.Remote.
controls.up.to.4.devices,.including.the.most.popular.brands.of.TV,.
VCR,.DVD,.SAT,.CBL,.and.audio.equipment..
Note:.Some.functions.from.your.original.remote.may.not.be.
controlled.by.the.20626.remote..Use.the.original.remote,.if.
available,.to.control.such.functions..Sometimes.buttons.other.than.
described.in.these.instructions.may.actually.perform.the.function..
For.example,.the.CHAN.and.VOL.buttons.might.be.used.to.navigate.
through.menu.choices..We.recommend.you.experiment.with.the.
remote.to.identify.if.such.situations.pertain.to.your.equipment..
The.20626.Universal.Remote.is.easy.to.use,.easy.to.program,.and.it.
gives.you.total.control—at.the.touch.of.your.fingertips!
3
Button Functions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
20.
19.
18.
17.
16.
15.
14.
13.
12.
11.
Note:.The.Record.button.must.be.pressed.TWICE.to.record.from.
your.VCR..For.some.brands.of.VCRs,.you.might.need.to.press.the.
Record.button.once,.then.press.it.again.for.three.seconds..Some.
buttons.on.the.remote.might.have.functions.that.are.referred.to.
by.different.names.on.the.device.you.are.controlling..E.G...LAST.
may.be.called.RECALL,.or.ENTER may.be.called.DISPLAY..These.
differences.depend.on.the.brand.and.model.of.your.product..Also,.
this.remote.can.only.operate.features.that.exist.on.your.product..
E.G.,.your.product.must.have.LAST.ability.for.the.LAST.button.to.
operate.this.feature.
4
Button Functions, cont.
1.
2.
3.
4.
5.
6.
7.
ON-OFF: Turns.device.On.or.Off.
Red Indicator:.Lights.when.any.button.is.pressed.
TV, DVD, CBL/SAT, DVR/AUX:.Selects.product.to.be.operated..
MUTE: Turns.off.the.TV.sound.while.the.picture.remains..
VOLUME UP/DOWN: Changes.the.volume.level.of.the.product,.normally.the.TV.
UP,.DOWN,.LEFT &.RIGHT: Navigation.buttons.
MENU: brings.up.the.DVD.disc.Menu.screen..Use.with.the.UP,.DOWN,.LEFT &.
RIGHT navigation.buttons.
5.
8.
INPUT Selects.the.video.inputs.of.your.TV.if.equipped.with.that.feature.
ENTER:.Used.after.direct.channel.number.entry.to.immediately.change.to.the.
selected.channel.
9.
NUMBERS:.Enter.numbers.for.direct.channel.selection..Some.products.require.
Enter.to.be.pressed.after.channel.selection.
10.
11.
(•).Used.for.digital.channels,.e.g..2.3.
RECORD, PLAY, STOP, REW, FF, PAUSE:...VCR.control.buttons.operate.your.VCR.even.
when.the.remote.is.set.to.operate.the.TV..Also.operates.DVD.Scan.-/+.
12.
TV/VCR/INPUT: Operates.the.same.as.the.TV/VCR.or.antenna.keys.on.your.original.
remotes.
13.
14.
15.
16.
17.
18.
INFO: Displays.on-screen.channel.information,.etc.
GUIDE: Displays.satellite.or.cable.on-screen.program.guide.
EXIT: Exits.On-Screen.Menus.and/or.Returns.to.previous.On-Screen.selection.
LAST: Returns.to.the.previously.selected.channel,.or.DVD.repeat.toggle..
OK: Selects.menu.items.for.the.device.you.are.controlling.
CHANNEL UP/DOWN:.Changes.the.channels..Also.controls.DVD/CD.CHAPTER.+/-.
track.selection.i.e..DVD/CD.Track.Skip.Up/Down..Note.the.VCR buttons.also.control.
DVD.when.in.DVD.Mode.
19.
20.
SETUP: Used.for.setting.up.your.remote.
BACKLIGHT: Backlighting.On/Off.
ꢀ
Setup
Battery Installation
1.. On.the.back.of.the.remote,.push.down.on.the.tab.and.lift.the.
cover.off.
2.. Match.the.batteries.to.the.+.and.-.marks.inside.the.battery.
case,.then.insert.2.AAA.alkaline.batteries.
3.. Press.the.battery.cover.back.into.place.
Battery Saver
Your.remote.automatically.turns.off.if.the.buttons.are.depressed.
more.than.30.seconds..This.will.save.your.batteries.should.your.
remote.get.stuck.in.a.place.where.the.buttons.remain.depressed.
(e.g.,.between.the.sofa.cushions).
Code Saver
You.will.have.up.to.10.minutes.to.change.the.batteries.in.your.
remote.without.losing.codes.you.have.programmed..However,.do.
not.press.any.buttons.until.batteries.are.installed.in.the.remote..If.
buttons.are.pressed.without.batteries.in.the.remote,.all.codes.will.
be.lost..
Power-On Default
The.remote.powers.on.in.TV.mode.
Code Setup
The.SETUP.button.is.used.to.setup.the.remote..You.can.either.setup.
the.remote.using.the.code.for.your.brand.of.product,.from.the.code.
tables.(on.separate.sheet),.or.you.can.search.through.the.library.of.
codes.until.you.find.a.code.that.works.for.your.product.
Please.refer.to.“Programming.with.Code.Search”.on.page.8.for.
more.information.on.using.the.code.search.feature.to.learn.how.to.
search.through.the.library.of.codes.for.your.products.
NOTE:.You.can.store.any.kind.of.code.under.any.mode.(except.TV)..
I.E..you.can.store.a.VCR.code.under.the.CBL button,.or.a.SAT.code.
under.the.DVD button,.etc..However,.you.can.only.store.TV.codes.
under.the.TV button.
6
Direct Code Entry
1.... Press.and.hold.the.SETUP.button.until.the.red.indicator.stays.
on,.then.release.the SETUP.button.
2.... Press.and.release.the.desired.mode.button.(TV, DVD,.etc.)..The.
red.indicator.blinks,.then.stays.lit...
3.. Enter.the.4.digit.code.from.the.code.tables.(on.separate.sheet)..
Note:.after.a.valid.code.entry,.the.red.indicator.turns.off...For.
an.invalid.code,.the.red.indicator.flashes.
4.. With.your.device.on,.press CHANNEL UP..If.the.device.
responds,.no.further.programming.is.required..Note:.If.some.
buttons.do.not.operate.your.equipment,.try.one.of.the.other.
codes.for.your.brand.
Write.your.codes.down.here.for.easy.reference.later.
Device.
.................................Device.stored.........
.........Code
TV. ..................................................TV
DVD. .
CBL/SAT
DVR/AUX
7
Code Search
If.your.product.does.not.respond.after.you.have.tried.all.the.codes.
for.your.brand,.or.if.your.brand.is.not.listed,.try.searching.for.your.
code.by.following.these.steps.
1.. Manually.turn.on.the.device.(TV,.DVD,.etc.).to.be.controlled.
2.. Press.and.hold.the.SETUP.button.until.the.red.indicator.stays.
on,.then.release.the.SETUP button.
3... Press.and.quickly.release.the.desired.mode.button.(TV,.DVD,.
etc.)..The.red.indicator.blinks.off.once.
4.. Press.the.CHANNEL UP.button.repeatedly.(up.to.300.times).
until.the.device.to.be.controlled.changes.channel..The.red.
indicator.blinks.off.with.each.button.press...If.you.accidentally.
overshoot.the.code.required,.press.the.CHANNEL DOWN
button.to.backtrack.through.the.library.until.the.device.
changes.channel..Pressing.CHANNEL UP.changes.direction.to.
forward.again..
ꢀ.. Press.and.release.ENTER to.install.the.code..
Most.users.will.store.DVD.codes.under.the.DVD button,.Cable.
codes.under.CABLE,.etc..If.(for.example).you.want.to.store.a.DVD.
code.under.CABLE,.first.follow.the.procedure.for.Direct.Code.Entry.
(previous.page).and.press.CABLE in.step.2.of.Direct.Code.Entry,.
then.enter.ANY.DVD.code.in.step.3.of.Direct.Code.Entry..Then.follow.
the.steps.for.Code.Search.on.the.previous.page..Note:..If.the.device.
does.not.have.a CHANNEL UP.button,.use.PLAY (DVD.only).or.ON-
OFF instead..Code.Search.starts.from.the.currently.stored.4.digit.
number.under.that.mode.
8
Code Identification Feature
The.Code.Identification.Feature.allows.you.to.identify.the.three.digit.
library.code.stored.under.your.device.key..For.example,.if.you.want.
to.find.out.what.4.digit.code.is.stored.under.your.TV.device.key,.
follow.the.six.steps.below:
1.. Press.and.hold.the.SETUP.button.until.the.red.indicator.stays.
on..Release.the SETUP.button.
2.. Press.and.release.the.desired.mode.button.(TV,.DVD,.etc.)..The.
red.indicator.blinks,.then.stays.lit...
3.. Press.and.release.the.SETUP.button..The.red.indicator.blinks.
off.
4.. To.find.the.first.digit.for.the.code.stored.under.the.mode.key.
pressed.in.step.2,.press.each.numeric.key.from.0-9.in.turn..
When.the.red.indicator.blinks.off.the.number.you.pressed.is.
the.first.digit.for.the.code.you.are.searching.for.
ꢀ.. To.find.the.second.digit,.repeat.step.4,.this.time.when.the.red.
indicator.blinks.off.this.is.the.second.digit.
6.. Repeat.step.4.to.find.the.third.and.fourth.digits.
9
Setup, cont.
Programming Combo Device Codes
Some.Combo.devices.(e.g..TV/VCR,.TV/DVD,.DVD/VCR,.etc.).will.
require.you.to.set.up.two.different.Mode.buttons.to.control.both.
parts.of.the.Combo.device..For.example,.if.you.have.a.TV/DVD.
Combo,.you.might.need.to.set.up.one.code.under.the.TV button.to.
control.the.TV.part.AND.a.separate.code.(under.any.other.Mode.
button).to.control.the.DVD.part.
Controlling Combo Devices
Some.Combo.devices.(e.g..TV/VCR,.TV/DVD,.DVD/VCR,.etc.).have.
separate.buttons.on.the.original.remote.to.select.the.part.of.the.
Combo.device.to.be.controlled..For.example,.if.your.Combo.device.
is.a.DVD/VCR.then.its.original.remote.might.have.separate.DVD.
and.VCR.buttons.for.selection.of.the.Combo.part.you.would.control..
The.equivalent.button.functions.can.be.found.on.your.new.remote.
by.using.the.device.Mode.and.SETUP buttons...
Referring.to.“Programming.with.Code.Search”.on.page.8,.setup.
a.device.Mode.(e.g..DVD).with.the.correct.code.for.your.Combo.
device..Assuming.the.DVD/VCR.Combo.device.is.the.example.and.
its.code.is.programmed.under.DVD Mode,.press.and.hold.the.DVD.
Mode.button.for.more.than.one.second.to.send.the.DVD.button.
command..To.send.the.VCR.button.command,.quickly.press.and.
release.the.SETUP button.followed.by.pressing.and.releasing.
the.DVD.Mode.button..This.method.can.be.applied.similarly.to.
all.Combo.devices.(e.g..TV/VCR,.TV/DVD,.DVD/VCR,.etc.).and.is.
available.for.all.Modes..Note.this.feature.is.not.supported.by.all.
codes..
Controlling Devices Requiring Separate Power On and Off
Buttons
Some.devices.(e.g..certain.RCA.TVs).require.separate.Power.On.and.
Power.Off.buttons.to.turn.the.device.on.and.off..The.equivalent.
button.functions.can.be.found.on.your.new.remote.by.using.the.
device.Mode.and.ON-OFF buttons..Referring.to.“Programming.with.
Code.Search”.on.page.8,.setup.a.device.Mode.(e.g..TV).with.the.
correct.code.for.your.device..
Assuming.a.TV.device.is.the.example.and.its.code.is.programmed.
under.TV.Mode,.to.turn.your.TV.on,.press.and.hold.the.TV.Mode.
button.for.more.than.one.second.to.transmit.the.Power.On.button.
command..
10
Setup, cont.
Controlling Devices Requiring Separate Power On and Off
Buttons, cont.
To.turn.the.TV.off,.press.and.release.the.ON-OFF.button.to.transmit.
the.Power.Off.button.command..This.method.can.be.applied.
similarly.to.any.device.and.is.available.for.all.Modes..Note.this.
feature.is.not.supported.by.all.codes..
VCR/DVD/DVR Punch-Through Feature
This.remote.allows.the.6.VCR.transport.buttons.(i.e..PLAY,.PAUSE,.
STOP,.FF,.REWIND,.and.REC).to.Punch-Through.control.from.any.
Mode.programmed.with.TV,.SAT.or.Cable.codes.to.the.last.VCR,.
DVD.or.DVR.programmed.Mode.you.used...Normally.other.types.
of.remotes.only.punch-through.(from.another.Mode).on.the.6.VCR.
buttons.to.the.device.programmed.under.the.VCR Mode.button..
This.is.not.much.use.if.you.are.using.a.DVD.programmed.under.a.
Mode.other.than.VCR..For.example,.if.you.have.3.DVD,.VCR.or.DVR.
devices.programmed.into.this.remote,.the.last.one.you.accessed.
on.the.remote.will.be.the.one.that.has.control.of.the.6.VCR.
transport.buttons.when.in.any.other.Mode...This.feature.will.not.
operate.if.the.programmed.TV,.SAT.or.Cable.code.has.its.own.VCR.
transport.button.control.e.g..a.TV.Combo,.SAT/PVR,.etc.
Volume/Mute Control and Punch-Through Feature
This.remote.lets.you.select.which.device.Mode.controls.your.
Volume/Mute.buttons..The.remote.is.initially.set.(factory.default).
for.all.device.Modes.programmed.with.“Visual”.codes.(e.g..TV,.VCR,.
DVD,.DVR,.SAT.&.CABLE).and.“Audio”.codes.(e.g..CD.&.AUDIO).to.
use.their.own.Volume/Mute.control.if.present..If.the.programmed.
“Visual”.code.has.no.Volume/Mute.operation.of.its.own.then.those.
buttons.will.punch-through.control.to.the.TV.Mode.device.without.
needing.to.change.to TV.Mode..Please.refer.to.the.next.page.for.
more.information.
.
11
Setup, cont.
Any Mode chosen for Volume/Mute control MUST have its own
Volume/Mute function or the Volume/Mute buttons will do
nothing.
Setting ALL Volume/Mute Control to any one Mode
This.routine.can.set.all.Modes.to.“punch-through”.to.any.one.
chosen.Mode.for.Volume/Mute.button.control.without.the.needing.
to.change.to.that.Mode.
1... Press.and.hold.the.SETUP button.until.the.red.indicator.turns.
on,.then.release.the.button.
2... Press.and.hold.the.MUTE.button.until.the.red.indicator.blinks.
off,.then.release.the.button.
3... Press.and.release.the.desired.Mode.button.(TV,.DVD,.etc.).for.
Volume/Mute.control,.the.red.indicator.blinks.then.stays.on.
4... Press.and.release.the.MUTE button.and.the.red.indicator.turns.
off..The.red.indicator.will.blink.rapidly.for.three.seconds.if.the.
Mode.you.have.selected.has.no.Volume/Mute.control..
ꢀ... All.other.Modes.will.now.punch-through.to.your.chosen.Mode.
for.Volume/Mute.control.
6... All.“Visual”.and.“Audio”.programmed.Modes.will.now.punch-
through.to.the.respective.Modes.you.have.chosen.for.Volume/
Mute.control.
Setting any Mode to use its own Volume/Mute Control
This.routine.can.set.any.Mode.to.use.only.its.own.Volume/Mute.
control..Note.-.If.your.chosen.Mode.has.no.Volume/Mute.functions.
of.its.own.then.the.Volume/Mute.buttons.will.do.nothing.
1... Press.and.hold.the.SETUP button.until.the.red.indicator.turns.
on,.then.release.the.button.
2... Press.and.hold.the.MUTE.button.until.the.red.indicator.blinks.
off,.then.release.the.button.
3... Press.and.release.the.desired.Mode.button.(TV,.DVD,.etc.),.the.
red.indicator.blinks.then.stays.on.
4... Press.and.release.the.VOLUME-.(Down).button,.the.red.
indicator.blinks.then.stays.on.
ꢀ... Press.and.release.the.MUTE button.and.the.red.indicator.turns.
off..
6... All.“Visual”.and.“Audio”.programmed.Modes.will.now.punch-
through.to.the.respective.Modes.you.have.chosen.for.Volume/
Mute.control.
Troubleshooting
Remote does not operate your product.
•.. Press.the.mode.button.of.the.product.you.want.to.control.
•.. Program.the.remote.with.a.new.code.
•.. Install.new.batteries..(You.might.have.to.reprogram.your.remote.
after.installing.new.batteries.)
•.. Remote.may.not.be.compatible.with.your.product.
Remote does not operate some features of your product.
•.. Program.remote.with.a.new.code.
•.. Remote.may.not.be.able.to.operate.all.features.of.your.product.
or.button.names.might.be.different.than.your.product.
Red Indicator blinks after you program a product code.
•.. Remote.did.not.accept.the.code.
•.. Try.to.program.the.code.again.or.try.a.different.code.
If.you.lose.your.codes.or.programming.instructions,.you.can.find.
them.available.on.our.website:.www.jascoproducts.com
90 Day Limited Warranty
Jasco.Products.Company.warrants.this.product.to.be.free.from.
manufacturing.defects.for.a.period.of.ninety.days.from.the.original.
date.of.consumer.purchase...This.warranty.is.limited.to.the.repair.
or.replacement.of.this.product.only.and.does.not.extend.to.
consequential.or.incidental.damage.to.other.products.that.may.be.
used.with.this.unit...This.warranty.is.in.lieu.of.all.other.warranties.
express.or.implied...Some.states.do.not.allow.limitations.on.how.
long.an.implied.warranty.lasts.or.permit.the.exclusion.or.limitation.
of.incidental.or.consequential.damages,.so.the.above.limitations.
may.not.apply.to.you...This.warranty.gives.you.specific.rights,.and.
you.may.also.have.other.rights.which.vary.from.state.to.state....If.
unit.should.prove.defective.within.the.warranty.period,.return.
prepaid.with.dated.proof.of.purchase.to:
Jasco.Products.Company
10.E..Memorial.Road
Oklahoma.City,.OK..73114
14
20626
Universal Remote
Instruction Manual
Jasco.Products.Company
10.E..Memorial.Road
Oklahoma.City,.OK..73114
Made.in.China. ..............................
1ꢀ
20626-04/09
|