CAUTION
Precautions
Playable discs
• DVD VIDEO, Audio CD, Video CD, SVCD
Connections
Before making connections:
• Do not connect the AC power cord until all other connections have been made.
• Connect VIDEO OUT of the player directly to the video input of your TV. Connecting VIDEO OUT of the
player to a TV via a VCR/an integrated TV/Video system may cause a monitor problem.
DVD PLAYER
XV-N320B
XV-N322S
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
Notes on the power cord
Connecting to a stereo audio amplifier (receiver)
EX. 1
• When you are away on travel or otherwise for an extended
period of time, remove the plug from the wall outlet. A
small amount of power (1.0 W) is always consumed while
the power cord is connected to the wall outlet.
• When unplugging the player from the wall outlet,
always pull the plug, not the power cord.
• Do not handle the power cord with wet hands!
• Disconnect the power cord before cleaning the
player or moving the player.
• Do not alter, twist or pull the power cord, or put
anything heavy on it, which may cause fire, electric
shock, or other accidents.
• If the cord is damaged, consult a dealer and have the
power cord replaced with a new one.
To AV COMPU LINK (II, EX, or III)
PB
Y
V I D E O
Caution ––
Disconnect the mains plug to shut the power off
completely. The STANDBY/ON button in any
position does not disconnect the mains line. The power
can be remote controlled.
STANDBY/ON button!
RIGHT
• DVD-R/-RW written in the DVD VIDEO format
CD-R/RW written in the SVCD, Video CD or Audio CD format
• CD-R/RW written in MP3/JPEG in accordance with
the “ISO 9660” format
TV
LEFT
IDEO
VIDEO
VIDEO OUT
PR
AUDIO OUT
•
INSTRUCTIONS
Basic Connection
The player
To analog audio input
®
S-video cable*
(not supplied)
TV
• Set the player’s AV COMPU LINK setting as follows:
– When connecting to the VIDEO-1 input terminal of
the television: DVD2
– When connecting to the VIDEO-2 input terminal of
the television: DVD3
Connecting to a digital audio device
NOTES
Supported Digital audio formats:
Linear PCM, MPEG Multichannel, Dolby Digital, DTS (Digital
Theater Systems)*
To enjoy high-quality surround sound, connect the
DIGITAL OUT (COAXIAL) jack to a Dolby Digital or DTS
decoder or an amplifier with a built-in decoder.
V I D E O
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
IN
• Set the correct color system according to
the color system your TV supports. (See
“COLOUR SYSTEM” in “Initial settings.”)
• If your TV has a monaural audio input
instead of stereo, use an optional audio
cable which converts stereo audio output
to monaural.
S-VIDEO
2. CAUTION: Do not open the top cover. There are no
user serviceable parts inside the unit; leave all
servicing to qualified service personnel.
3. CAUTION: Visible and invisible laser radiation when
open and interlock failed or defeated. Avoid direct
exposure to beam.
VIDEO
NOTES
PB
Y
COAXIAL
• If a disc gets dirty, scratched or warped, or due to the
disc characteristics or recording conditions, the
player may not be able to play back such discs.
• The player can play back audio signals recorded in
MIX-MODE CD, CD-G, CD-EXTRA and CD TEXT.
• With some discs, operations may not be possible.
* To play back DTS-encoded DVD VIDEO or DTS-
encoded Audio CD discs correctly, connect the
player to an amplifier with a built-in DTS decoder.
Otherwise, playback sound will be distorted.
L
E
EX. 2
GNT0059-017A[AG/AH/AX/AS/UM/AA]
0205MOC-MW-SC
©2005 Victor Company of Japan, Limited
PCM/STREAM
F
T
RIGHT
AU
DIO
EN
To AV COMPU LINK
(II, EX, or III)
To AV
COMPU LINK
RI
G
LEFT
S-VEO
VIDEO
VIDEO OUT
PR
H
T
DIGITAL OUT
AUDIOOUT
Avoid moisture, water, dust, and high temperatures
• Do not place the player in moist or dusty places.
• If water gets inside the player, turn off the power and
remove the plug from the wall outlet, then consult
your dealer. Using the player in this state may cause
a fire or electrical shock.
To analog
• If your TV is a HDTV or HD-ready TV, you
can connect with component (Y, PB, PR)
jacks. By connecting with component (Y,
PB, PR) jacks, you can select the
progressive scanning mode which provides
the best picture quality.
* The S-VIDEO jack and the component (Y,
PB, PR) jacks cannot be used at the same
time.
Region code of DVD VIDEO
audio input
4. REPRODUCTION OF LABEL: CAUTION LABEL,
PLACED INSIDE THE UNIT.
TV
This player can play back DVD VIDEO discs
whose region code numbers include the player’s
Region Code, which is indicated on the region
code symbol on the rear panel.
P
The player
VCR
C
COA
M
/
S
X
IAL
TREAM
The player
PR
To digital audio input
DIGITA
Yellow
• Set the VCR’s Remote Control Code and the player’s
AV COMPU LINK setting as follows:
– When connecting to the VIDEO-1 input terminal of
the television:
The player’s AV COMPU LINK setting: DVD2
VCR’s Remote Control Code: B
– When connecting to the VIDEO-2 input terminal of
the television:
Examples of playable DVD VIDEO discs:
• Do not expose the player to direct sunlight or place it
near a heating device.
S-
VIDEO
L
OUT
RI
GH
VID
VIDEO UT
T
NOTES
PB
Audio/video
cable*
(supplied)
Unplayable discs
L
EF
T
• Depending on the disc, no signal may be outputted
from the DIGITAL OUT. Make an analog connection
in this case.
1 2
3 4
1 2 3
4 5 6
AUDIO OUT
CAUTION:
Notes on installation
• Select a place which is level, dry and neither too hot
nor too cold between 5˚C and 35˚C.
• Leave sufficient distance between the player and the TV.
• Do not install the player in a place subject to vibrations.
• Do not put heavy objects on the player.
ALL
If you try to play back discs listed below, noise may be
generated and causes damage to speakers.
• DVD-RW written in the VR format
• DVD-ROM, DVD-RAM, DVD AUDIO, CD-ROM,
PHOTO CD, SACD
2 5
2
AV
CO
MP
• Do not block the ventilation openings or holes. (If the
ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to
get out.)
• Do not place any naked flame sources, such as
lighted candles, on the apparatus.
• When discarding batteries, environmental problems
must be considered and local rules or laws
governing the disposal of these batteries must be
followed strictly.
• Do not expose this apparatus to rain, moisture,
dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the
apparatus.
U
LI
NK
When using the S-VIDEO jack, do not
connect the component (Y, PB, PR) jacks
with the player.
White
• Set [DIGITAL AUDIO OUTPUT] in the [AUDIO]
preference display correctly according to the
connected digital audio equipment. (See “DIGITAL
AUDIO OUTPUT” in “Initial settings.”)
The player’s region code is printed on the rear of
the player
Red
Note of Color system format
• Unfinalized discs
The player’s AV COMPU LINK setting: DVD3
VCR’s Remote Control Code: A
This player is compatible with the PAL and NTSC
systems. Select the correct color system for your
TV (see “Initial settings”).
Connecting to a TV with component jacks
About the scanning mode indicator
• Discs of irregular shape or discs with tape, seals or
paste on either the label side or playback side.
Playing back these discs may damage the player.
To prevent malfunction of the player
• There are no user-serviceable parts inside. If anything goes
wrong, unplug the power cord and consult your dealer.
• Do not insert any metallic objects, such as wires,
hairpins, coins, etc. into the player.
• Do not block the vents. Blocking the vents may
damage the player.
[PICTURE SOURCE] of
the PICTURE menu
AUTO
FILM
VIDEO(NORMAL)/
(ACTIVE)
Source type of DVD VIDEO
EX. 3
Using the AV COMPU LINK system
The AV COMPU LINK system allows you to enjoy video
and/or audio by simply pressing Play on the source
component (the component which plays back the video
or audio, such as a DVD player or VCR). You
do not even have to switch on power on the TV or
receiver.
Film source
[DDP]
Video source
[P]
To AV COMPU LINK
(II, EX, or III)
To AV
COMPU LINK
PB
Supplied accessories
RI
Y
[DDP]
[DDP]
OAXIAL
REAM
The Non-DVD side of a “DualDisc” does not comply with
the “Compact Disc Digital Audio” standard.
Therefore, the use of Non-DVD side of a DualDisc on
this product may not be recommended.
If anything is missing, consult your dealer
immediately.
• Audio/video cable (Yellow/White/Red) (x 1)
• Remote control (x 1)
• R6(SUM-3)/AA(15F) battery (x 2)
• AC power plug adaptor (x 1)
(Only for Singapore)
TV
LE
[P]
[P]
S-VIDEO
VIDEO
VIDEO OUT
PR
AUDIO OUT
OUT
Receiver
The player
To component video input
NOTE
To clean the cabinet
• Use a soft cloth. Follow the relevant instructions on
the use of chemically-coated cloths.
• Do not use benzene, thinner or other organic solvents and
disinfectants. These may cause deformation or discoloring.
Some progressive TV and High-Definition TV sets are
not fully compatible with the player. To check the
compatibility of your TV, contact your local JVC
customer service center.
Caution: Proper Ventilation
To avoid risk of electric shock and fire and to protect
from damage, locate the apparatus as follows:
• Set the player’s AV COMPU LINK setting to DVD1.
To switch the scanning mode between Progressive and
Interlace, press and hold VFP-I/P on the remote control
for a few seconds.
Connection and setup
Notes for connection
Using an AV COMPU LINK cable, connect the AV
COMPU LINK terminals of each component to one
another.
• The player’s AV COMPU LINK setting is controlled
using the OTHERS menu in the preference display.
See “AV COMPULINK MODE” in “Initial settings.”
• See also the instruction manual of the other device.
• If you connect the player to a receiver via AV COMPU
LINK in a system including a Dolby Digital decoder,
some functions may not be performed automatically.
• Connect the AUDIO OUT jacks of the player to the
audio input jacks of a receiver indicating “DVD.”
Otherwise, the system will not work correctly.
Front:
No obstructions and open spacing.
NOTES
Sides: No obstructions in 3 cm from the sides.
• Connect “Y” to “Y,”“PB” to “PB(CB),”“PR” to “PR(CR)”
correctly.
Top:
Back:
No obstructions in 5 cm from the top.
No obstructions in 15 cm from the back.
• When using the component (Y, PB, PR) jacks, do not
connect the S-VIDEO jack with the player.
Bottom: No obstructions, place on the level surface.
Spacing 15 cm or more
Operation
1. Turn on the main power of the television.
2. Insert a disc (or tape) into the source component.
3. Press 3 of the source component.
The following actions are performed automatically:
• Turning on the television and/or receiver.
• Setting the source of the television to the external
input (VIDEO-1 or VIDEO-2).
XV-N320B/XV-N322S
Front
Wall or
obstructions
Stand height
5 cm or more
• Setting the source of the receiver to the component
which has started playback.
Floor
1
2
3
4
Turning on the power
Initial setup
Basic Operations
Advanced Operations
When you turn on the player for the first time after
purchase, the following message appears on the TV
screen.
Turning on and off the player
Changing the display window
contents
Changing the language, sound
Changing the picture tone (VFP)
The VFP (Video Fine Processor)
function allows you to adjust the
picture character according to the type
of programming, picture tone or
personal preferences.
Inserting the AC power plug
and scene angle
After all other connections have been made, insert the
AC power plug to the wall outlet firmly.
Insert a disc
STANDBY/ON
OPEN/
Each time you press DISPLAY,
the display window contents
changes.
Open/close the disc tray
CLOSE
1 Press the button.
STANDBY/ON
EXECUTE DVD PLAYER SETUP? - BASIC PICTURE/AUDIO
SETTING
YES - PRESS ENTER NO - PRESS CANCEL
OPEN/
1 Press 0 to open the disc tray.
CLOSE
2 Press the button repeatedly or
2 Place a disc in the disc tray.
• To insert an 8-cm disc, place it in the inner
recess.
3 Press 0 to close the disc tray.
+
–
SLOW
DISPLAY ON SCREEN
Turning on and off the player
Installing the batteries in the remote control
Open the compartment cover, and place the two
supplied R6(SUM-3)/AA(15F) batteries in the remote
control according to the polarity markings (“+” and “–”)
inside the compartment. Then replace the cover.
5/∞ to select the desired item.
3 Press ENTER to finish the
setting.
Basic playback
+
–
SLOW
DISPLAY ON SCREEN
TOP
MENU
THUMBNAIL/
LIST
Before enjoying this player, make the initial settings as
follows:
Buttons To do
TOP
MENU
THUMBNAIL/
LIST
Locating the beginning of a scene
or song
1 Press VFP-I/P.
2 Press 2/3 to select the desired
3* Start/resume normal Playback
Buttons
To do
ENTER
1 Press ENTER.
preset.
You can select a title/chapter/
track directly and start playback.
For DVD Video:
(While stopped) select title.
(While playing back) select
chapter.
ENTER
7
Stop
AUDIO
For DVD Video:
select audio languages.
For SVCD/VCD:
select the audio
channel.
• When RESUME is ON or DISC
RESUME, this player memorizes
the position on the disc where
you interrupted playback.
– To resume playback, press 3.
– To stop playback completely,
press 7 again.
DVD PLAYER SETUP
Selected
Preset
MENU
SET UP
NEXT
USER 1
MENU
SET UP
NEXT
MENU LANGUAGE
ENGLISH
PREVIOUS SELECT
GAMMA
MID
PREVIOUS SELECT
AUDIO LANGUAGE
ENGLISH
BRIGHTNESS
CONTRAST
+
4
CLEAR
SUBTITLE
ENGLISH
+10
CLEAR
ON SCREEN LANGUAGE
ENGLISH
ENGLISH
SATURATION +10
SUBTITLE select the subtitle.
ANGLE select the view-angle.
For SVCD/VCD/CD:
Select track.
CHINESE
SPANISH
1
4
2
5
8
0
3
6
TINT
+10
1
4
2
5
8
0
3
6
SHARPNESS
Y DELAY
LOW
To select 5: press 5.
8*
Pause
2 Press 5/∞ to select the on-screen language for
+
2
To select 23: press 2, then 3.
To select 40: press 4, then 0.
• If you press TITLE/GROUP
before entering the number, you
can select the title instead of the
chapter.
• Each time you press 8 on the
remote control, the still picture
advances to the next frame.
7
9
the preference displays, etc., then press ENTER.
CANCEL
RETURN
7
9
Parameter
Changing the Sound Field
CANCEL
RETURN
DVD PLAYER SETUP
NORMAL For watching TV in a general
TITLE/
GROUP
SOUND
EFFECT
Each time you press SOUND
EFFECT, the Sound Effect mode
changes.
• As the value becomes bigger, the
Sound Effect works stronger.
MONITOR TYPE
PICTURE SOURCE
SCREEN SAVER
COLOUR SYSTEM
BACKGROUND
4:3 L.B.
16:9
4:3 LB
room.
VFP DIMMER
I/P
¡/1 Fast forward/backward
(While paused)
TITLE/
GROUP
SOUND
EFFECT
VFP DIMMER
I/P
CINEMA For watching a movie
software in a room with
suppressed light.
4:3 PS
ANGLE SUBTITLE AUDIO ZOOM
SLIDE EFFECT
Slow-motion playback
PAL
ANGLE SUBTITLE AUDIO ZOOM
SLIDE EFFECT
The batteries will last about six months with normal use.
If the functions of the remote control become erratic,
replace the batteries.
• Each time you press the button,
STANDARD
Using the disc menu
the playback speed changes.
USER1 You can adjust parameters
USER2 that affect the picture
character and store the
settings as a user preset.
See below.
With the label side up
You can operate a disc—SVCD/
VCD with Playback Control*
(PBC)—using the disc menu
shown on the TV screen.
* A method of controlling disc play
for SVCD/VCD by using the disc
menu.
¢/4 Skip chapter/track
3 Press 5/∞ to select the monitor type, then press
ENTER.
• If you press and hold the button
during playback, playback is
advanced/reversed at 5 times
normal speed.
Precautions of the safe use of batteries
Observe the following precautions for the safe use of
batteries. If they are used improperly their lives will be
shortened, they may burst or their contents may leak.
• Remove the batteries from the remote control if it is
not going to be used for a long period of time.
• Remove dead batteries and dispose of them
properly.
• Never leave dead batteries lying around, take them
apart, mix them with other refuse, or throw them into
an incinerator.
• Never touch liquid that has leaked out of a battery.
• Do not mix new and old batteries, or batteries of
different types, when placing them.
• For a normal (conventional) TV, select “4:3 LB” or
“4:3 PS.” (See “MONITOR TYPE” in “Initial
settings.”)
Zooming the picture
To adjust the picture tone
Each time you press ZOOM, the
magnification changes.
Point toward the remote sensor directly as possible
(the operating range is approx. 5 m.)
• For a wide-screen TV, select “16:9.”
VARIABLE (For DVD Video)
1 Select “USER1” or “USER2.”
2 Press 5/∞ to select a parameter, then press ENTER.
PLAYBACK The disc is played back at about
/VARI-PLAY 1.2 or 1.5 times (FAST)/0.8 or 0.6
times (SLOW) normal speed.
The sound is not muted, and the
subtitle does not go off (except for
DTS).
• You can use 5/∞/2/3 button to
DVD PLAYER SETUP
7 For DVD
move the zoomed position.
DIGITAL AUDIO OUTPUT
ANALOG DOWNMIX
D.RANGE CONTROL
OUTPUT LEVEL
DOLBY DIGITAL/PCM
PCM ONLY
GAMMA
Adjust this if the neutral color is bright or dark. The
brightness of dark and bright portion is maintained
(LOW/MID/HIGH).
1 Press TOP MENU or MENU to show the disc menu.
2 Press 5/∞/2/3 to select a desired item, then press
To return to the normal playback,
select the normal size by pressing
ZOOM repeatedly.
About On-screen guide icons
DOLBY DIGITAL/PCM
STREAM/PCM
: Playback.
ENTER or 3 (SELECT).
STANDARD
• With some discs, you can also select items by entering the
number using the numeric buttons.
BRIGHTNESS Adjust this if the picture is bright or dark on the
: Pause.
(For SVCD/VCD)
whole (–16 (darkest) to +16 (brightest)).
/
: Slow-motion playback with the current
speed.
Main display
7 For SVCD/VCD
The disc is played back at about 2
times (FAST)/0.5 times (SLOW)
normal speed.
CONTRAST Adjust this if the far and near position is unnatural
4 Press 5/∞ to select a desired digital output
signal type, then press ENTER.
• Each indicator lights up when corresponding
function/mode is activated, or corresponding
information is on the main display.
1 While stopped, press TOP MENU or 3 (SELECT) to
(–12 to +12).
show the menu.
/
: Fast forward/backward playback with the
current speed.
Set this item correctly according to the logo on your
receiver or decoder.
(If you do not connect the player to such a device,
press ENTER to finish the setting.)
• Receiver/decoder bearing Dolby Digital logo and
no DTS, select “DOLBY DIGITAL/PCM.”
• Receiver/decoder bearing both Dolby Digital and
DTS logos, select “STREAM/PCM.”
• Receiver/decoder bearing neither Dolby Digital nor
DTS logo, or digital recorder, select “PCM ONLY.”
Turning on and off the player
2 Press the numeric buttons to select a desired item.
To select 5: press 5.
SATURATION Adjust this if the picture is whitish or blackish
(Only for DVD Video)
Press
STANDBY/ON.
(–16 (blackest) to +16 (whitest)).
The playback position moves
back 10 seconds before the
current position (only within the
same title).
To select 23: press 2, then 3.
To select 40: press 4, then 0.
: At the beginning of a scene containing multi-
angle views.
TINT
Adjust this if the appearance of flesh tone is
unnatural (–16 to +16).
• To move to the next or previous page of the current menu,
press ¢ or 4.
: At the beginning of a scene containing multi-
audio sounds.
SHARPNESS Adjust this if the picture is indistinct (LOW/HIGH).
*
38 on the player starts/pauses playback.
• To return to the previous menu, press RETURN.
Y DELAY
Adjust this if the picture looks separately/
overlapped (–2 to +2).
: At the beginning of a scene containing multi-
subtitles.
You can change the setting so that the on-screen
guide icons do not appear on the TV screen. (See
“ON SCREEN GUIDE” in “Initial settings.”)
To play back without PBC
While stopped, press the numeric buttons instead of 3
(SELECT) to start playback.
To reactivate PBC
Changing the display brightness
3 Press 5/∞ to adjust the parameter, then press ENTER.
4 Repeat step 2 and 3 to adjust other parameters.
5 Press VFP-I/P to finish the setting.
To bring up the DVD PLAYER SETUP display later
Press SET UP for a few seconds until the DVD PLAYER
SETUP display appears.
Press DIMMER to change the brightness of
the display window.
• Press TOP MENU or MENU.
• Press 7 to stop playback, then 3 (SELECT).
5
6
7
8
|