JBL Home Theater System HLS410 User Manual

HLS410, HLS610  
HLS615, HLS620  
HLS810, HLS820  
HLS Center  
simple setup guide  
thank you  
for choosing JBL. For more than 50 years, JBL  
has been involved in every aspect of music and film recording  
and reproduction, from live performances to monitoring the  
recordings you play in your home, car or office.  
We’re confident that the JBL loudspeakers you have chosen will  
provide every note of enjoyment that you expected – and that  
when you think about purchasing additional audio equipment for  
your home, car or office, you will once again choose JBL.  
Please take a moment to complete the enclosed profile card.  
It enables us to keep you posted on our latest advancements,  
and helps us to better understand our customers and build  
products that meet their needs and expectations.  
JBL Consumer Products  
 
two.  
Speaker Connections  
Connection Tips  
Speakers and electronics terminals have corresponding (+) and  
(–) terminals. It is important to connect both speakers identi-  
cally: (+) on the speaker to (+) on the amplifier and (–) on the  
speaker to (–) on the amplifier. Wiring “out of phase” results in  
thin sound, weak bass and a poor stereo image.  
HLS610, HLS615, HLS620, HLS810, HLS820, HLS Center  
RIGHT  
LEFT  
+
+
– +  
RIGHT  
– +  
LEFT  
Speaker Outputs  
HLS410  
RIGHT  
LEFT  
– +  
– +  
– +  
RIGHT  
– +  
LEFT  
Speaker Outputs  
 
Troubleshooting  
If there is no sound from  
any of the speakers, check  
the following:  
If the system plays at low  
volumes but shuts off as  
volume is increased, check  
the following:  
If there is low bass output,  
check the following:  
• Make sure the polarities  
(+ and –) of the left and  
right “Speaker Inputs” are  
connected properly.  
• Receiver/amplifier is on and  
a source is playing.  
• Review proper operation of  
your receiver/amplifier.  
• Check all wires and connec-  
tions between receiver/  
amplifier and speakers.  
• Make sure all wires are con-  
nected. Make sure none of the  
speaker wires are frayed, cut  
or punctured.  
• If more than one pair of  
main speakers is being used,  
check the minimum imped-  
ance requirements of your  
receiver/amplifier.  
If there is no sound from  
the center speaker, check  
the following:  
If there is no sound coming  
from one speaker, check the  
following:  
• Make sure that your receiver’s  
Center Channel Mode is in the  
”normal“ or ”wide“ position.  
If it is in the ”phantom“  
position, the center speaker  
will not play.  
• Check the “Balance” control  
on your receiver/amplifier.  
• Check all wires and connec-  
tions between receiver/  
amplifier and speakers.  
• Make sure all wires are  
connected. Make sure none of  
the speaker wires are frayed,  
cut or punctured.  
• Check all connections  
between processor/amplifier  
and the center speaker.  
 
 
Declaration of Conformity  
We, JBL Europe A/S  
Kongevejen 194B  
DK-3460 Birkerød  
DENMARK  
declare in own resopsibility, that the looudspeakers  
described in this owner‘s manual are in compliance with  
technical standards:  
JBL Consumer Products  
250 Crossways Park Drive, Woodbury, NY 11797  
8500 Balboa Boulevard, Northridge, CA 91329  
1-800-336-4JBL (4525) (USA only)  
EN 50081-1:1992  
EN 50082-1:1992  
© 1998 JBL, Incorporated. JBL is a registered trademark  
of JBL, Incorporated.  
8/98  
Part No. 332661-002  
Steen Michaelsen  
JBL Europe A/S  
Birkerød. DENMARK. 8/98  
A Harman International Company  
 

Indesit Washer IWE 6125 User Manual
Ingersoll Rand Sander 16607103 User Manual
Intel Network Card IQ80332 User Manual
John Lewis Cooktop JLBIGH753 User Manual
JVC Speaker System UXVJ3B User Manual
Kawasaki Work Light 690081 1HR User Manual
Kenwood Stereo Receiver KR 596 User Manual
Kidde Carbon Monoxide Alarm KN COB B LPM User Manual
Konica Minolta Printer 5430 DL User Manual
Krell Industries CD Player KAV 280cd User Manual