Insignia Digital Camera NS DSC10A User Manual

Quick Setup Guide  
NS-DSC10A/NS-DSC10B  
Congratulations on your purchase  
of a high-quality Insignia product.  
Your Insignia digital camera is  
designed for reliable and trouble-  
free performance. Use this guide for  
initial setup of your camera. If you  
have questions, see your User Guide  
for more information.  
Package contents  
USB cable  
Quick Setup Guide  
2 AA alkaline batteries  
CD with User Guide  
Wrist strap  
 
Installing batteries  
1
2
3
Open the battery cover by sliding it in the direction indicated by the  
arrow.  
Insert two AA batteries with the positive (+) and negative (-) terminals  
matching the directions indicated inside the battery compartment.  
Close the battery cover.  
Inserting a memory card  
1
2
Open the battery cover.  
Insert an SD or SDHC card with the  
metallic part facing the back of the  
camera and the connectors pointing in.  
3
Close the battery cover.  
Note: To remove the card, gently press on the edge of the  
card and release it. Pull the card out and close the battery  
cover.  
Turning the power on and off  
1
Press and hold POWER to turn the camera on.  
The lens extends and the Insignia startup image is displayed  
on the LCD.  
2
Press POWER again to turn the camera off.  
 
3
Power-saving function  
To save battery power, turn the power saving function ON so that the  
camera automatically turns off two minutes after the last control has  
been accessed. You can change the power save setting in the Setup  
menu.  
The power save feature will not activate while you are:  
• Recording or playing video  
• Erasing or copying files  
• Connecting the camera to a computer with the USB cable  
Changing the mode  
You can record images and videos in Record mode. Use Playback mode  
to replay, delete, or copy images and video on the LCD display.  
To switch between Record mode and Playback mode  
In Record mode, press  
In Playback mode, press  
(playback) to switch to Playback mode.  
(record) to switch to Record mode.  
 
4
Using menus  
Use the four-way control and OK/DISP to make menu selections.  
To use the Record menu  
1
Turn the camera on. If the camera  
is not in Record mode, press the  
Record button.  
Qualit
y  
Fine  
High  
Auto  
Sunny  
Off  
Resolution  
ISO  
2
3
Press  
Record menu.  
(menu) to display the  
Color Balance  
Stabilizer  
Press up or down arrows to  
select a menu item and left or  
right arrows to change the  
setting.  
4
Press  
(menu) or OK/DISP to save settings and close the menu.  
To use the setup menu  
1 Turn the camera on. If the camera  
is not in Record mode, press the  
Record button.  
Sounds  
On  
On  
Off  
Set  
On  
Quick View  
Date Stamp  
Date & Time  
Power Save  
2 Press  
(menu) to display the  
Record menu.  
3 Use the four-way control to select  
SETUP, then press OK/DISP to  
display the Setup menu.  
4 Press up or down on the 4-way navigation control to select a menu  
item, then press right on the 4-way navigation control or OK/DISP to  
display it.  
5 Press up or down on the 4-way navigation control to select an  
option, then press OK/DISP to apply the setting.  
6 Press  
(menu) to close the menu.  
 
5
307  
Taking pictures  
10M  
1
Turn the power on. Set your camera  
to Record mode by pressing the  
Record button until the camera icon  
appears in the upper left of the LCD  
monitor.  
2
3
Aim the focus area on the subject  
that you want to take a photo of.  
AUTO  
Press the shutter button half-way  
down to focus the image.  
The focus area turns green when  
the subject is in focus; the aperture  
value, shutter speed and ISO value  
are displayed.  
F2.8 1/60  
100  
If the shutter speed is slow or picture  
may blur, the shake warning icon  
may appear on the display. To avoid this, use a tripod to stabilize the  
camera when recording images.  
4
Press the shutter button fully to take the picture.  
Note: Be sure not to block the lens with your fingers or the wrist strap.  
 
6
02:03:04  
Recording video clips  
x4.0  
1
2
Turn the power on.  
Press the Record mode button until  
the movie icon appears in the upper  
lefthand corner of the LCD monitor.  
3
4
Focus your camera on the subject  
that you want to take.  
Press the Shutter button to start  
recording. Use the  
control to  
zoom in and zoom out an image.  
Note: When recording videos, audio recording  
mutes during zoom operation.  
5
Press the Shutter button again to  
stop recording.  
Note: The camera will automatically stop recording  
when memory capacity has been reached.  
Playing back images  
1
Turn the power on and set the camera to Playback mode.  
The last recorded image or video appears on the display. If no images  
are stored, [No image] appears on the display.  
2
Using the 4-way navigation control, press to see the previous image  
or to see the next image.  
Note: Hold the or buttons down to scroll through images quickly.  
Connecting the camera to a computer  
There are two ways to download files from the camera to a computer:  
Insert the memory card into a card reader  
- OR -  
Connect the camera to a computer using the supplied USB cable  
 
7
Connecting the camera to a computer with the USB cable  
1
Connect the supplied USB cable to  
the computer’s USB port and turn  
on the camera.  
A confirmation message appears  
on the LCD screen confirming that  
a connection has been made, and  
then the LCD screen turns off.  
2
3
On Windows computers open My  
Computer or Windows Explorer.  
Removable Disk appears in the drive  
list. On Macintosh computers,  
a card icon will appear on the desktop. Double-click the icon to access  
images.  
Double-click the Removable Disk icon to view its contents. Pictures and  
video clips stored on the camera or memory card are located in the  
DCIM folder.  
Accessing the User Guide  
Insert the enclosed CD into your computer, then open the User Guide  
file. If your computer has a slot-load CD/DVD drive, do not insert a mini  
user guide.  
- OR -  
the Digital Camera link under Products.  
© 2009 Best Buy Enterprise Services, Inc. All rights reserved. INSIGNIA is a trademark of Best Buy Enterprise Services, Inc.  
Registered in some countries. All other products and brand names are trademarks of their respective owners.  
ENGLISH 09-0394  
 
8

Infinite Peripherals Network Router ScanPro BlackBerry User Manual
Ingersoll Rand Cordless Drill FE034A User Manual
Ingersoll Rand Heat Pump PD03P User Manual
JL Audio Car Speaker TR690 TXi User Manual
JVC Car Stereo System GET0163 001A User Manual
JVC CD Player KD AVX22 User Manual
JVC DVD VCR Combo HR XVC11B User Manual
Kidde Carbon Monoxide Alarm KN OOB B User Manual
KitchenAid Coffeemaker KCM534ER0 User Manual
KitchenAid Refrigerator KBLS22EVMS1 User Manual