User Guide
USB 3.0 PCI Express Card
NS-PCCUP53/NS-PCCUP53-C
Before using your new product, please read these instructions to prevent any damage.
Insignia NS-PCCUP53/NS-PCCUP53-C USB 3.0 PCI Express Card
•
•
Avoid touching the gold-plated PCIe bus and the onboard electronic
components.
This product is for general computer use. It is not to be used as equipment
requiring exceptional reliability, particularly when the breakdown or
malfunction of this product may jeopardize life or health (such as
aerospace equipment, atomic power control systems, traffic-related
equipment, transportation equipment, industrial robotics, combustion
equipment, various safety devices, and life-support systems).
Features
•
•
Compliant with Universal Serial Bus 3.0 specification Revision 1.0.
Compliant with Intel xHCI (eXtensible Host Controller Interface) spec. Rev
1.00.
•
•
•
Compliant with PCI Express Base Specification Revision 2.0. Single-lane
(x1) PCI Express (Ver 2.0 Spec.) throughput rates of up to 5 Gbps.
Supports simultaneous operation of multiple USB 3.0/USB 2.0/USB 1.1
devices.
Each USB port supplies a maximum of +5V/900mA power output to a USB
device.
•
•
•
Provides two external USB 3.0 SuperSpeed ports.
Built-in 4-pin power connector for receiving extra power from the system.
Compatible with a standard PCI Express slot.
Package contents:
•
•
•
•
USB 3.0 PCI Express Card
Short Backplate
Windows driver CD
Quick Setup Guide
If you need to replace any of these items, call 1-877-467-4289.
3
Insignia NS-PCCUP53/NS-PCCUP53-C USB 3.0 PCI Express Card
Components
Card description
Edge view
Side view
USB 3.0
Ports (2)
USB 3.0
Ports (2)
4-pin power
connector
Installing your USB 3.0 PCI Express Card
System requirements
•
PCI Express-enabled system with an available PCI Express x1 slot. (We
recommend PCI Express 2.0)
•
Windows® 8, Windows® 7, Windows Vista®, Windows® XP
Cautions
• Opening your computer's case may void your computer's
warranty. Contact your computer's manufacturer before
opening the case to make sure that you do not void the
warranty.
• Before touching any electronic components, make sure
that you first touch an unpainted, grounded metal object
to discharge any static electricity stored on your clothing
or body.
• Handle the PCI Express Card adapter by the metal
mounting bracket and the printed circuit board (PCB)
edges only. Avoid touching the gold-plated PCIe bus and
the onboard electronic components.
Note
In order to get USB 3.0 SuperSpeed performance, use a PCI
Express Ver2.0 slot for the card installation. Refer to the user
manual for your system or motherboard to find the correct slot.
4
Insignia NS-PCCUP53/NS-PCCUP53-C USB 3.0 PCI Express Card
Installing the hardware
Note
PC components often have sharp metal edges. To prevent injury,
exercise caution when removing/installing components from
your PC, especially when exerting force.
To install the card:
1
Turn off your computer and unplug the power cord and all cables.
2
Remove your computer's case cover. See your computer's user guide
for information about removing the cover.
3
Locate an available PCI Express slot, remove the screw that secures the
backplate (the small piece of metal that covers the opening for the PCI
card on the back panel of your computer), then remove the backplate.
If you are using a slim desktop computer, attach the included short
backplate prior to installation.
To change backplates, remove the screws that secure the standard
backplate to the PCI card, remove the standard backplate, then attach
the short backplate with the screws you removed.
4
5
Carefully insert the adapter into the PCIe x1 slot, seating it firmly into
the slot. Do not touch the metal connector on the adapter.
Connect an available floppy 4-pin power plug from your PC's power
supply to the adapter card's 4-pin power connector.
Power
supply
4-pin
floppy
power
PCI slot x16
PCIe slot
x16
PCIe slot
x1
6
Secure the adapter to the case using the screw you removed from the
backplate.
7
8
Reinstall your computer's case cover.
Plug in the power cord and other cables, and then turn on your
computer.
5
Insignia NS-PCCUP53/NS-PCCUP53-C USB 3.0 PCI Express Card
Windows driver installation
Note
The USB 3.0 driver is only for the Windows operating system.
(Only Windows XP through Windows 7 requires the driver,
Windows 8 does not.) It does not support Mac and Linux
operating systems.
To install the Windows driver:
1
Save all files and close all programs. Insert the included driver CD into
your optical drive. The driver home page opens.
2
Click Install Driver. The installation wizard opens.
6
Insignia NS-PCCUP53/NS-PCCUP53-C USB 3.0 PCI Express Card
3
4
5
6
Click Next, then follow the on-screen instructions to install the driver.
The End User License Agreement page opens.
Select I accept the terms of the license agreement, then click Next.
The install screen opens.
Click Install to begin the installation. When the installation process is
complete, the InstallShield Wizard Complete screen opens.
Click Finish to complete the process.
To verify the driver installation:
1
Click Start, right-click Computer (or My Computer), then select
Properties.
2
3
Click Device Manager, then click Universal Serial Bus controllers.
If the device has been correctly installed, its sub-entry should be
displayed as Renesas Electronics USB 3.0 Host Controller and
Renesas Electronics USB 3.0 Root Hub.
To uninstall the Windows driver:
1
2
3
Click the Add or Remove Programs tab (Uninstall a Program in
Windows 7) in the Windows Control Panel.
Click the Remove button to uninstall the Insignia USB 3.0 PCI Express
Card Driver.
Click Finish to complete the driver uninstall procedure.
7
Insignia NS-PCCUP53/NS-PCCUP53-C USB 3.0 PCI Express Card
Troubleshooting
Check the following guide for the possible causes and solutions for a
problem before contacting the nearest service center or dealer for repairs.
14
Symptom
Solution
The Windows Device
•
•
•
Make sure that the PCI Express Card adapter is correctly installed in
Manager does not show
the Renesas Electronics
USB 3.0 Host Controller.
the PCIe slot.
Remove the adapter and try a different PCIe slot in case the bus has
conflicts.
Repeat the driver installation procedure, then make sure that the
device exists. Right-click Computer in the Start menu (or My
Computer on your desktop), click Properties, then click the Device
Manager. If the Renesas Electronics USB 3.0 Host Controller is
shown, the PCI Express Card adapter is working correctly.
Make sure that your computer's operating system is updated to the
latest version.
•
No USB peripheral is
detected by the
computer.
•
•
•
•
Make sure that all cables are correct and securely connected.
Make sure that the USB device's power is turned on.
Make sure that the devices are getting enough power.
Make sure to plug the 4-pin power cable into the adapter card to
provide sufficient power to USB devices, or use self-powered USB
devices.
•
A long cable may cause poor performance. A USB repeater must be
used if the cable is longer than 3.5 meters.
•
•
Make sure that there is no problem with the adapter installation.
Conflict with other
Windows USB PCI
adapters.
Conflicts are indicated by an entry in the Device Manager with a red
X or yellow exclamation point.
Turn off your computer and move the adapter to another available
slot, then re-install the USB 3.0 driver.
An exclamation point n the Device Manager usually means there is a
resource conflict between this adapter and another adapter in your
system. Move the adapter to another slot, then restart your computer.
Windows will re-configure itself and re-assign resources. Check your
device manager again.
•
•
8
Insignia NS-PCCUP53/NS-PCCUP53-C USB 3.0 PCI Express Card
Specifications
USB 3.0 host controller
Max. data transfer rate
I/F to PC
Renesas uPD720202
USB 3.0 : 5.0Gbps
PCI Express2.0 x 1
External ports
2x USB 3.0 type A
(Support SuperSpeed/ High-Speed/Full-Speed/Low-Speed)
Power input
4-pin power connector
Power output
DC +5V/ Max. 900mA
System support
Dimensions (H x W x D)
Windows® 8, Windows® 7, Windows Vista®, Windows® XP
4.72 × 3.19 × 0.86 in
(120 × 81 × 22 mm)
Operating temperature
Storage temperature
32°F~104°F
(0°C~40°C)
-4°F~140°F
(-20°C~60°C)
Operating humidity
Certification
0%~80% RH, non-condensing
FCC Class B, ICES, SuperSpeed USB compliance
9
Insignia NS-PCCUP53/NS-PCCUP53-C USB 3.0 PCI Express Card
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measure
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
IC Statement:
This equipment complies with the applicable technical standard of ICES-003 issue 5 August
2012 Information Technology Equipment (ITE) – Limits and methods of measurement,
according to the measurement procedures specified in Canadian Standards Association
Standard CAN/CSA-CISPR 22-10.
Industry Canada ICES-003 Compliance Label: CAN ICES-3 (B)/NMB-3(B)
Notices
Specifications and features are subject to change without notice or obligation.
For service and support call 1-877-467-4289.
10
Insignia NS-PCCUP53/NS-PCCUP53-C USB 3.0 PCI Express Card
One-year limited warranty - Insignia
Definitions:
The Distributor* of Insignia branded products warrants to you, the original purchaser of this
new Insignia-branded product (“Product”), that the Product shall be free of defects in the
original manufacturer of the material or workmanship for a period of one (1) year from the
date of your purchase of the Product (“Warranty Period”).
For this warranty to apply, your Product must be purchased in the United States or Canada
How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the date you purchased the Product.
Your purchase date is printed on the receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or workmanship of
the Product is determined to be defective by an authorized Insignia repair center or store
personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or
(2) replace the Product at no charge with new or rebuilt comparable products or parts.
Products and parts replaced under this warranty become the property of Insignia and are
not returned to you. If service of Products or parts are required after the Warranty Period
expires, you must pay all labor and parts charges. This warranty lasts as long as you own your
Insignia Product during the Warranty Period. Warranty coverage terminates if you sell or
otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a Best Buy or Future Shop retail store location, please take
your original receipt and the Product to any Best Buy or Future Shop store. Make sure that
you place the Product in its original packaging or packaging that provides the same amount
of protection as the original packaging. If you purchased the Product from a Best Buy or
mail your original receipt and the Product to the address listed on the web site. Make sure
that you put the Product in its original packaging or packaging that provides the same
amount of protection as the original packaging.
To obtain warranty service, in the United States call 1-888-BESTBUY, Canada call
1-866-BESTBUY for Future Shop call 1-800-663-2275. Call agents may diagnose and correct
the issue over the phone.
Where is the warranty valid?
This warranty is valid only in the United States and Canada at Best Buy or Future Shop
branded retail stores or websites to the original purchaser of the product in the county
where the original purchase was made.
What does the warranty not cover?
This warranty does not cover:
•
•
•
•
•
•
•
•
Customer instruction/education
Installation
Set up adjustments
Cosmetic damage
Damage due to weather, lightning, and other acts of God, such as power surges
Accidental damage
Misuse
Abuse
11
Insignia NS-PCCUP53/NS-PCCUP53-C USB 3.0 PCI Express Card
•
•
Negligence
Commercial purposes/use, including but not limited to use in a place of business or in
communal areas of a multiple dwelling condominium or apartment complex, or
otherwise used in a place of other than a private home.
•
•
Modification of any part of the Product, including the antenna
Display panel damaged by static (non-moving) images applied for lengthy periods
(burn-in).
•
•
•
•
•
•
•
•
Damage due to incorrect operation or maintenance
Connection to an incorrect voltage or power supply
Attempted repair by any person not authorized by Insignia to service the Product
Products sold “as is” or “with all faults”
Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)
Products where the factory applied serial number has been altered or removed
Loss or Theft of this product or any part of the product
Display panels containing up to three (3) pixel failures (dots that are dark or incorrectly
illuminated) grouped in an area smaller than one tenth (1/10) of the display size or up
to five (5) pixel failures throughout the display. (Pixel based displays may contain a
limited number of pixels that may not function normally.)
Failures or Damage caused by any contact including but not limited to liquids, gels or
pastes.
•
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE
REMEDY FOR BREACH OF WARRANTY. INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL
OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY
ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR
PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER
EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED
WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY
PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Insignia:
For customer service please call 1-877-467-4289
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in Taiwan
12
www.insigniaproducts.com 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in Taiwan
V1 ENGLISH
14-0325
|