4012i,5012i,6012i,6012si,9612i,
9613i,3012cf,6412cf,6412cfp,6812cf
t
reference series
INSTALLATION
CONNECTIONS
Figure 3. Mounting the 6412cf and 6412cfp.
Figure 4. Mounting the 6012i or 6012si with
Figure 6. Mounting the 6012i or 6012si in standard
Figure 7. Connect the speakers to the amplifier
the grille.
speaker locations.
observing proper polarity.
Note:The 6412cf and 6412cfp are designed to be
installed under factory grilles. Consequently, no
grilles are packaged with these models.
Note: If you are replacing a DIN (oval basket)
4" x 6" speaker with a 6412cf, remove the speaker
from the mounting bracket as shown in Figure 3.
BIG LUG IS
POSITIVE (+)
SMALL LUG
IS NEGATIVE (—)
Figure 5. Mounting the 6012i or 6012si in 165mm
speaker locations.
FOAM GASKET
FOAM GASKET
™
UniPivot Tweeter: Rotate tweeter, so it is angled
toward the listener, using the UniPivot feature
on the 5012i, 6012i, 9612i and 6812cf.
INTERMOUNT III (PATENT NO. 6,505,705)
The 6012i and 6012si are packaged with two
different speaker adaptor rings.These are used
to install the 6-1/2" speakers in various vehicles.
The metal ring can be mounted in many
European vehicles, while the plastic ring can be
mounted in many vehicles using 6-3/4" speaker
locations or three-point mounting frames.
FOAM GASKET
MOUNTING RING
FOAM GASKET
reference series
SPECIFICATIONS
4012i
Type:
6012si
Type:
3012cf
Type:
6812cf
Type:
4" 2-Way
4 Ohms
35W RMS, 105W Peak
85Hz – 21kHz
91dB
1-7/8" (48mm)
3-3/4" (96mm)
6-1/2" Shallow-Mount
2-Way
4 Ohms
50W RMS, 150W Peak
53Hz – 21kHz
92dB
1-15/16" (50mm)
5" (127mm)
3-1/2" 2-Way
4 Ohms
25W RMS, 75W Peak
85Hz – 21kHz
90dB
1-7/16" (37mm)
3-1/16" (78mm)
6" x 8"/5" x 7" 2-Way
4 Ohms
60W RMS, 180W Peak
49Hz – 21kHz
92dB
2-7/16" (62mm)
5" x 7-3/16"
Speaker Impedance:
Power Handling:
Frequency Response:
Sensitivity (2.83V, 1m):
Mounting Depth:
Cutout Diameter:
Speaker Impedance:
Power Handling:
Frequency Response:
Sensitivity (2.83V, 1m):
Mounting Depth:
Cutout Diameter:
Speaker Impedance:
Power Handling:
Frequency Response:
Sensitivity (2.83V, 1m):
Mounting Depth:
Cutout Diameter:
Speaker Impedance:
Power Handling:
Frequency Response:
Sensitivity (2.83V, 1m):
Mounting Depth:
Cutout Diameter:
(127mm x 183mm)
5012i
Type:
6412cf
Type:
9612i
Type:
5-1/4" 2-Way
4 Ohms
45W RMS, 135W Peak
67Hz – 21kHz
91dB
2-1/4" (58mm)
4-11/16" (120mm)
4" x 6" 2-Way
4 Ohms
40W RMS, 120W Peak
72Hz – 21kHz
91dB
1-15/16" (50mm)
3-5/8" x 5-5/8"
(93mm x 143mm)
6" x 9" 2-Way
4 Ohms
100W RMS, 300W Peak
46Hz – 21kHz
92dB
3" (77mm)
6-1/16" x 8-7/8"
(154mm x 226mm)
Speaker Impedance:
Power Handling:
Frequency Response:
Sensitivity (2.83V, 1m):
Mounting Depth:
Cutout Diameter:
Speaker Impedance:
Power Handling:
Frequency Response:
Sensitivity (2.83V, 1m):
Mounting Depth:
Cutout Diameter:
Speaker Impedance:
Power Handling:
Frequency Response:
Sensitivity (2.83V, 1m):
Mounting Depth:
Cutout Diameter:
6012i
Type:
6-1/2" 2-Way
4 Ohms
60W RMS, 180W Peak
53Hz – 21kHz
92dB
2-1/16" (53mm)
5" (127mm)
6412cfp
Type:
9613i
Type:
Speaker Impedance:
Power Handling:
Frequency Response:
Sensitivity (2.83V, 1m):
Mounting Depth:
Cutout Diameter:
4" x 6" 2-Way Plate
4 Ohms
45W RMS, 135W Peak
72Hz – 21kHz
6" x 9" 3-Way
4 Ohms
100W RMS, 300W Peak
46Hz – 21kHz
92dB
3" (77mm)
6-1/16" x 8-7/8"
(154mm x 226mm)
Speaker Impedance:
Power Handling:
Frequency Response:
Sensitivity (2.83V, 1m):
Mounting Depth:
Cutout Diameter:
Speaker Impedance:
Power Handling:
Frequency Response:
Sensitivity (2.83V, 1m):
Mounting Depth:
Cutout Diameter:
91dB
Declaration of Conformity
1-15/16" (50mm)
3-9/16" x 5-11/16"
(91mm x 145mm)
We, Harman Consumer Group International
2, route de Tours
72500 Chateau-du-Loir
France
A valid serial number is required for warranty coverage.
Features, specifications and appearance are subject to change without notice.
declare in own responsibility that the products
described in this owner’s manual are in compliance
with technical standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
Infinity Systems, 250 Crossways Park Drive, Woodbury, NY 11797 USA
Klaus Lebherz
© 2005 Harman International Industries, Incorporated • Part No. REFME1/05
Harman Consumer Group International
Chateau-du-Loir, France 1/05
¤
|